Eaton Power Xpert PXM 4000, User And Installation Manual

Page: 134 / 292

Page 126
IM02601004E
www.eaton.
8 Setup on the Web Server Pages
3. Click OK.
Note: If you aren’t logged in or you doesn’t have sufficient privileges, you’ll receive an authentica -
tion violation error message.
To print the current configuration:
1. Click Print all settings.
2. Select a printer.
To restore factory default settings:
• Click Factory Reset.
VIEW & CREATE TRIGGERS SETUP
Event triggers can be automatic or manual. If you select manual triggering, the meter will use these
programmed limits for event triggering.
Each manual trigger input can be programmed to monitor performance, capture waveform, capture
parameters, and/or send e-mail. When an event is triggered, the Reset Value will be used to check
and clear the condition. Every event and its corresponding parameters, along with data and time of
the occurrence, are logged and available for display or retrieval using a communication port.
The Power Xpert Meter has seven kinds of triggers; Out of Limit, ITIC, Demand Overload, Subcycle
Disturbance, Digital Input Status, Modbus Triggered, and Fast Transient. Input Status triggers are
configured in the I/O section of the setup under Meter Setup & Commissioning. (See Internal I/O
Input Setup). Modbus triggered events are not configurable, and as such are not shown here.
OUT OF LIMITS SETUP
The Out of Limits Triggers are divided into three categories; Meter, Power and Quality. Each have
several options to choose from. Refer to Appendix C for a list of these options.
Locating Out of Limits Setup On The Web
1. On the Setup Main Page, select Triggers from the tree structure on the left side of the page.
The tree structure will expand to list Out of Limits, Demand Overload, ITIC, Fast Transient and
Subcycle Disturbance.
2. Click Out of Limits. The list will expand to include the main Out of Limits categories: Meter,
Power, and Quality. Click a category to view or edit.
3. The list will expand again to include all of the options under the selected category. After a selec-
tion is made, the page will update to list all the current settings for that trigger.