Smart LT Manual
Dynatronix, Inc.
198-0853-02 Rev F
Page 25 of 126
6.2. Menu Overview
6.2.1. Menu Organization
The LT display is organized into menus and run screens. Run screens provide information about
the supply status, the supply output and other cycle status information. Several run screens are
available providing various sets of information. Run screens are used during normal supply
operation. Menus provide access to a list of parameters and configuration items related to power
supply behavior and cycle control. The following diagram is an overview of the menus available
and how they are accessed. The diagram shows that there are three menus (green) and that a
normal power up will show the last active run screen (blue). The bold arrows show the path of a
normal power on sequence. The run screen select menu and the setup menu can be accessed at
any time from the active run screen. The unit configuration menu can only accessed at power on.
See
Appendix A:Menu Tree
for details on all the screens in each menu.
Info screens time out or
OPER/STBY switch pressed,
or host sends operate or
standby.
Pwr
ON
Unit
Config
Menu
Info Screens:
Version Info
Host Port Info
Active Run
Screen
Run Screen
Select
Menu
Setup
Menu
Both encoder switches
pressed at power on.
Encoders pressed
one second.
Encoders pressed
three seconds.
Power up in
standby
Power up in
operate.
The active run
screen is the
normal operating
screen.