Page 122 of 126
198-0853-02 Rev F
18
X
X
Invalid checksum in configuration
EEPROM
Cycle power. All factory
configuration settings are set to
default values, unit may not
operate correctly. There could
be a component failure. Contact
Dynatronix.
YES
YES
19
X
X
I2C bus communications error with
EEPROM
Cycle power. If fault continues
report to Dynatronix, Inc.
YES
YES
20
X
The initialization sequence did not
complete without errors
Cycle power. If fault continues
report to Dynatronix, Inc.
YES
YES
21
X
X
Voltage setting is outside of the
power supply ratings.
Cycle power. The setting will be
changed to zero. Adjust the
setting to the desired value.
YES
NO
22
X
X
Voltage setting is outside of the
power supply ratings.
Cycle power. The setting will be
changed to zero. Adjust the
setting to the desired value.
YES
NO
23
X
X
Current setting is outside of the
power supply ratings.
Cycle power. The setting will be
changed to zero. Adjust the
setting to the desired value.
YES
NO
24
X
X
Current setting is outside of the
power supply ratings.
Cycle power. The setting will be
changed to zero. Adjust the
setting to the desired value.
YES
NO
25
X
X
The displayed current could not be
auto-ranged for proper display and
may be truncated.
Cycle power. If fault continues
report to Dynatronix, Inc.
NO
YES
26
X
X
The displayed current could not be
auto-ranged for proper display and
may be truncated.
Cycle power. If fault continues
report to Dynatronix, Inc.
NO
YES
27
X
N/A
N/A
N/A
N/A
28
X
N/A
N/A
N/A
N/A
29
X
N/A
N/A
N/A
N/A
30
X
N/A
N/A
N/A
N/A
31
X
N/A
N/A
N/A
N/A
32
X
N/A
N/A
N/A
N/A
33
N/A
N/A
N/A
N/A
34
N/A
N/A
N/A
N/A
35
X
N/A
N/A
N/A
N/A
36
X
N/A
N/A
N/A
N/A
37
X
N/A
N/A
N/A
N/A
38
X
N/A
N/A
N/A
N/A
39
X
N/A
N/A
N/A
N/A
40
X
N/A
N/A
N/A
N/A
41
N/A
N/A
N/A
N/A
42
N/A
N/A
N/A
N/A
43
X
N/A
N/A
N/A
N/A
44
X
N/A
N/A
N/A
N/A
45
X
N/A
N/A
N/A
N/A
46
X
N/A
N/A
N/A
N/A
47
X
N/A
N/A
N/A
N/A