Dynatronix LT1200X SERIES, Operating Manual, Page: 101 / 126

Smart LT Manual Dynatronix, Inc.
198-0853-02 Rev F Page 101 of 126

For single channel supplies (LT1200W Series) set the channel ID to zero.

No response is sent to commands directed to the global unit ID (00).
B.1.6 Communications Settings (factory default)
– RS485
Baud Rate Bits Parity Stop Bits Handshake
*9600 8 none 1 none (master-slave)

The RS485 host port can be operated on a multi-drop bus (multiple power supplies connected
to a single host, all using the same communications cable). The master is always listening
unless sending a command. Slave units are always listening for commands unless sending a
response. Slave units only respond to commands that contain their address.
* The baud rate is selectable, see the “User Settings” (t) command or Section
B.1.17User
Settings Command “t”:
for setting the baud rate manually.