DURKOPP ADLER 577 Series, Manual

Page: 116 / 202

4.9 Changing and adjusting the knife (slot cutting)
CAUTION: DANGER OF ACCIDENTS !
Turn off main switch!
The sewing cage must stand in its initial position, because otherwise
the knife will knock against the cage!
Switch on the adjustment aid before installing the knife!
Remove the knife
–
Loosen the nut 1 .
–
Pull out the knife 2 .
Install the knife
Switch on the adjustment aid, and:
–
Turn on the main switch.
(the cage will be lifted.)
–
Press the key "P" on the control panel.
(The menu of the operator level will be called up.)
–
Cross the menu by operating the key until "+" "F - 020" is
displayed.
–
"oFF" will appear after pressing the key " E ".
–
Press the key "+" for switching on the adjustment aid.
(The display will present "on" and an arrow above the key 3 .)
NOTE !
Do not turn the handwheel or the crank when using the adjustment aid!
3
1
2
14