DURKOPP ADLER 577 Series, Manual

Page: 193 / 202

Key function settings
P
E
+
-
Key 1
Key 2
Key 3
Key 4
Key A
Key B
(Key B )
Call up/end programming mode
(Only in the programming mode )
Display parameter value / Making the parameter value
accessible for the change
Confirming the parameter entry with simultaneous change to
the next parameter
Direct function:
Increasing the speed
In programming mode:
Change to the next parameter of the parameter list
Increase the displayed parameter value / Turn on the
displayed parameter (
"on" )
Direct function:
Speed reduction
In Programming mode:
Change over to the preceding parameter of the parameter list
Reducing the displayed parameter value / Turning off the
displayed parameter (
"oFF" )
Softstart
Double rotation
Only if the Programming mode and "F - 020" are "on"
Lifting/lowering the sewing basket
Only if the Programming mode and "F - 020" are "on"
Knife on/off
( without function )
Direct function:
Only with the parameter setting "F - 195" on "4"
Brief operation:
Resetting the hook thread counting ( after bobbin change )
Operation longer than 1 second:
Hook thread counting on/off
Programming mode:
Shift-Key
( see operating instructions of the motor manufacturer )
on / oFF
on / oFF
on / oFF
3
43