DURKOPP ADLER 577 Series, Manual

Page: 120 / 202

4.12 Thread tension
The machine head has been set in the factory for sewing buttonholes
with flat bartacks and with raised lips.
Pre-tension
The pre-tension 4 is always active. It serves for stabilising the needle
thread. It should be set to the minimum value (5-10 g). The
pre-tension
4 has scarcely any influence on the seam pattern.
Main tension
The main tension 5 is active when sewing both buttonhole lips. But the
main tension 5 it is out of action when bartacking and when cutting the
threads.
Bartack tension
The bartack tension 6 is opened only when cutting the threads. It is
remains closed during the entire remaining sewing process.
Buttonhole lip tension
The buttonhole lip tension is produced jointly by the main tension 5
and by the bartacking tension 6. About 1/3 of the buttonhole lip tension
should be produced by the bartacking tension 6 .
Adjustment
–
Thread the needle thread so that it does not pass through the main
tension
5 .
–
Start the sewing process.
4
5
6
18