DURKOPP ADLER 577 Series, Manual

Page: 141 / 202

5.5 Installing and connecting the control panel
–
Remove the designation strip 9 of the cl. 577 from the driver
package and introduce it into the control panel.
–
By using the available fastening material, fasten first the control
panel
10 to the square 11 .
–
Then install the square 11 , together with the control panel 10 , on
the table top.
–
Lead the connecting cable of the control panel to the control box,
by passing it through the hole in the table top.
–
Introduce the plug of the control panel into the bush 12 and fasten
by a screw.
The illustration shows the rotary connection of the control panel when
using a stand for transversal/longitudinal operation.
Turning the control panel
–
Loosen the clamping lever 13 .
–
Turn the control panel in the desired position.
–
Tighten clamping lever 13 .
10
13
12
11
9
2
11