DURKOPP ADLER 577 Series, Manual

Page: 195 / 202

11.2 Parameter list of the operator level
Parameter Denomination Setting
max min Standard
F - 000
F - 001
F - 020
F - 085
Buttonhole counting on/off
(This function is only possible if the display of the
machine speed, Parameter
"F - 139" , is off )
Reset buttonhole counting
Setting aid for the knife and for the thread cutter
mechanically connected with the sewing basket.
The following functions are only possible if the needle
stands in the upper position and the sewing basket in the
rear position .
Key "+" = on
Key 3 = right arrow on
Sewing basket in upper position On / Sewing
basket in lower position Off
Key 3 = right arrow off
Sewing basket in upper position Off / Sewing
basket in lower position On
Key 4 = right arrow On
Knife On
Key 4 = right arrow Off
Knife Off
It is possible to select only one function at a time!
Number of buttonholes for the hook thread monitor
"F - 195" auf "1...4"
on
on
on
3000
oFF
oFF
oFF
0
oFF
oFF
oFF
0
3
45