DURKOPP ADLER 577 Series, Manual

Page: 124 / 202

Parameter list on the operator level
Denomination
Buttonhole counting On/Off
(This function is only possible
when the machine speed display,
Parameter
"F - 139" , is switched
off)
Reset buttonhole counting
Adjustment aid for the knife and for
the thread cutter, connected me-
chanically with the sewing cage.
The following functions are en-
abled only when the needle stands
in its upper position and the se-
wing cage in its rear position .
Key "+" on
Key 3 right arrow On
Sewing cage in upper
position
Key 3 right arrow Off
Sewing cage in lower
position
Key 4 right arrow On
Knife On
Key 4 right arrow Off
Knife Off
Only one function at a time can be
controlled!
Correction (+) of the after-running
stitches at the buttonhole end
Correction (-) of the after-running
stitches at the buttonhole end
Number of buttonholes for the
hook thread monitor
"F - 195" to "1...4"
Parameter
F - 000
F - 001
F - 020
F - 080
F - 081
F - 085
Adjustment
max min Standard
on oFF oFF
on oFF oFF
on oFF oFF
10 0 0
10 0 0
3000 0 0
22