DUPLO SEIKO CORPORATION Duprinter DP-330, Service Manual

Page: 258 / 330

257
c
HELP Mode Function and Operation Procedures
chap.7
ABCD Item Setting
0***
Whether there is a
TAPE CLUSTER or not.
There is a TAPE CLUSTER.
1***
There is not a TAPE CLUSTER.
*00*
Selecting buzzer.
Standard (Buzzer sounds)
*01*
Buzzer does not sound when trou-
ble occurs.
*10*
Does not sound
*11*
Does not sound
***0
KEYCARD COUNTER 2
specifications
KEYCARD COUNTER 2
***1
No KEYCARD COUNTER 2
1001
Initial value
e
Press the [
=
] key.
The correction amount will be memorized in the battery PCB unit's
EEPROM. During memorization,
"SAVE"
will be displayed.
Do not turn off the power before the "SAVE" display has disappeared.
1. Functions
(1) Tape cluster,Buzzer options,Key card counter
2 2
setting
¡
Following items are indicated.
A :Tape cluster
B,C :Buzzer options
D :Key card counter
2
(1) Tape cluster,Buzzer options,Key card counter
2 2
setting
H-28
(1) Adjustment / specification setting HELP mode
¡
During memorization:
IMPORTANT :
2. Operation procedure
Accessing HELP modes
a
See page 219
q
Access HELP mode H-28 , and press the PRINT key.
HELP-028
Adjustment/Specification setting
1001
w
Use the [ 0 ] and [ 1 ] numeric keys to enter a 4-place binary
value for the desired correction amount.
See the table below for 4-place binary values and the corresponding
correction amounts.
a
To exit the HELP mode : Turn the power switch OFF.
a
To access another HELP mode : Enter the desired mode number
using the numeric keys.
r
Press the STOP key.
The HELP mode selection display will reappear.
A B C D
- SAVE -