DUPLO SEIKO CORPORATION Duprinter DP-330, Service Manual

Page: 290 / 330

289
c
HELP Mode Function and Operation Procedures
chap.7
H-60
(1) Adjustment / specification setting HELP mode
e
Press the [
=
] key.
The correction amount will be memorized in the battery PCB unit's
EEPROM. During memorization,
"SAVE"
will be displayed.
Do not turn off the power before the "SAVE" display has disappeared.
1. Functions
(1) Control panel auto clear - timer, Fine start mode timer
setting
¡
Following items are indicated.
A ,B : Control panel auto clear - timer setting
C,D : Fine start mode - timer setting
(1) Control panel auto clear - timer, Fine start mode timer
setting
¡
During memorization:
IMPORTANT :
2. Operation procedure
Accessing HELP modes
a
See page 219
q
Access HELP mode H-60 , and press the PRINT key.
HELP-060
Adjustment/Specification setting
1111
w
Use the [
0
] and [
1
] numeric keys to enter a 4-place binary
value for the desired correction amount.
See the table below for 4-place binary values and the corresponding
correction amounts.
a
To exit the HELP mode : Turn the power switch OFF.
a
To access another HELP mode : Enter the desired mode number
using the numeric keys.
r
Press the STOP key.
The HELP mode selection display will reappear.
- SAVE -
A B C D
Display Item Setting
0 0
**
Control panel auto clear -
timer setting
OFF
0 1
**
3 minutes
1 0
**
10 minutes
1 1
**
15 minutes
**
0 0
Fine start mode - timer setting
Deactivated
**
0 1 6 hours
**
1 0 12 hours
**
1 1 Auto
0 0 1 1
Factory setting