DUPLO SEIKO CORPORATION Duprinter DP-330, Service Manual

Page: 291 / 330

290
c
HELP Mode Function and Operation Procedures
chap.7
H-61
(1) Adjustment / specification setting HELP mode
r
Press the [
=
] key.
The correction amount will be memorized in the battery PCB unit's
EEPROM. During memorization,
"SAVE"
will be displayed.
Do not turn off the power before the "SAVE" display has disappeared.
1. Functions
(1) Auto clear OFF/Auto power OFF/Auto LCD OFF time setting
¡
Following items are indicated.
1. 2. Auto clear OFF time setting
3. 4. Auto power OFF time setting
5. 6. Auto LCD OFF time setting
(1) Auto clear OFF/Auto power OFF/Auto LCD OFF time setting
¡
During memorization:
IMPORTANT :
2. Operation procedure
Accessing HELP modes
a
See page 219
q
Access HELP mode H-61 , and press the PRINT key. HELP-061
Adjustment/Specification setting
1111
1:
1111 2:
1111
4:
1111 5:
1111
3:
1111
6:
e
Use the [
0
] and [
1
] numeric keys to enter a 4-place binary
value for the desired correction amount.
See the table below for 4-place binary values and the corresponding
correction amounts.
a
To exit the HELP mode :
Turn the power switch OFF.
a
To access another HELP mode : Enter the desired mode number
using the numeric keys.
t
Press the STOP key.
The HELP mode selection display will reappear.
A B C D
- SAVE -
w
Press the and/or key to select item.
1. 3. 5.
ABCD
0000
0001
0010
0000
1100
2. 4. 6.
ABCD
0000 15 min.(standard)
Setting
1 min.
2 min.
16 min.
60 min.
0000
0000
0001
0011
Item
1.2. Auto clear off setting
3.4. Auto power off setting
5.6. Auto LCD off setting
(Only the longest time setting can be modified.)
If values are higher than those in the left
columns, all settings are set to 60 min.
A B C D