DUPLO SEIKO CORPORATION Duprinter DP-330, Service Manual

Page: 266 / 330

265
c
HELP Mode Function and Operation Procedures
chap.7
H-36
(1) Adjustment / specification setting HELP mode
ABCD Item Setting
0***
Sign flag
Moves toward you by the set
amount of the lower 3 digits.
1***
Moves backward by the set
amount of the lower 3 digits.
*000
Set amount
Standard (initial value)
Maximum
*001
*010
*011
*100
*101
***1
*111
r
Press the [
=
] key.
The correction amount will be memorized in the battery PCB unit's
EEPROM. During memorization,
"SAVE"
will be displayed.
Do not turn off the power before the "SAVE" display has disappeared.
1. Functions
(1) Scanning start/ primary scanning setting
¡
Following items are indicated.
1. Scanning start/ primary scanning (Scanner)
2. Scanning start/ primary scanning (ADF)
(1) Scanning start/ primary scanning setting
¡
During memorization:
IMPORTANT :
2. Operation procedure
Accessing HELP modes
a
See page 219
q
Access HELP mode H-36 , and press the PRINT key.
HELP-036
Adjustment/Specification setting
1111 1:
1111
2:
e
Use the [
0
] and [
1
] numeric keys to enter a 4-place binary
value for the desired correction amount.
See the table below for 4-place binary values and the corresponding
correction amounts.
a
To exit the HELP mode :
Turn the power switch OFF.
a
To access another HELP mode : Enter the desired mode number
using the numeric keys.
t
Press the STOP key.
The HELP mode selection display will reappear.
A B C D
- SAVE -
Scanner
ADF
w
Press the and/or key to select item.
1 rank: 1mm