DUPLO SEIKO CORPORATION Duprinter DP-330, Service Manual

Page: 164 / 330

163
x
Platemaking / Master Feed / Ejection Section
chap.4
Standard value
¡
Check that the clearance between the master ejection
box's rubber roller and the master clamp plate is
within the range given below.
If the clearance is outside the standard range
1) Turn the fixing screw indicated to move the C
mode shade plate and thereby adjust the
clearance. This operation adjusts the clearance
for both the C mode.
Do not press the master clamp
against the rubber roller.
IMPORTANT :
Standard value Item
Clearance between master
ejection box's rubber roller and
master clamp plate
0.5 - 1.0mm
Close
Open
B mode detect sensor
C mode shade plate
C mode detect sensor
Fixing screw
Rubber roller
Master clamp plate
0.5~1.0mm