DUPLO SEIKO CORPORATION Duprinter DP-330, Service Manual

Page: 275 / 330

274
c
HELP Mode Function and Operation Procedures
chap.7
H-44 ( DP-430 / 330 / 330L )
(1) Adjustment / specification setting HELP mode
e
Press the [
=
] key.
The correction amount will be memorized in the battery PCB unit's
EEPROM. During memorization, "SAVE" will be displayed.
Do not turn off the power before the "SAVE" display has disappeared.
1. Functions
(1) Thermal head resistance ranking setting
(1) Thermal head resistance ranking setting
¡
During memorization:
IMPORTANT :
2. Operation procedure
Accessing HELP modes
a
See page 219
q
Access HELP mode H-44 , and press the PRINT key.
w
Use the [ 0 ] and [ 1 ] numeric keys to enter a 4-place binary
value for the desired correction amount.
See the table below for 4-place binary values and the corresponding
correction amounts.
r
Press the
STOP
key.
The HELP mode selection display will reappear.
- SAVE -
HELP-044
Adjustment/Specification setting
1111
A B C D
DP-430/330/330L
DP-430/330/330L
H-44
0000
0001
0010
0011
0100
0101
0110
0111
3825 - 3908
3909 - 3993
3994 - 4077
4078 - 4162
4163 - 4246
4247 - 4330
4331 - 4415
4416 - 4499
1000
4500 - 4583
1001 4584 - 4668
1010 4669 - 4752
1011 4753 - 4837
1100
4838 - 4921
1101 4922 - 5005
1110 5006 - 5090
1111 5091 - 5175
DP-430 / 330 / 330L DP-430 / 330 / 330L
a
To exit the HELP mode : Turn the power switch OFF.
a
To access another HELP mode : Enter the desired mode number
using the numeric keys.
¡
The thermal head resistance ranking set using HELP modes H-44.