DUPLO SEIKO CORPORATION Duprinter DP-330, Service Manual

Page: 292 / 330

291
c
HELP Mode Function and Operation Procedures
chap.7
H-62
(1) Adjustment / specification setting HELP mode
r
Press the [
=
] key.
The correction amount will be memorized in the battery PCB unit's
EEPROM. During memorization, "SAVE" will be displayed.
Do not turn off the power before the "SAVE" display has disappeared.
1. Functions
(1) Edit monitor (OP) / CF card (OP) / Clock PCB (OP) / Program processing PCB for book shadow eraser
and multi-sided printing setting
¡
Following items are indicated.
1. Edit monitor (OP)/CF card (OP) setting
2. Clock PCB (OP) setting / Program processing PCB for book shadow eraser and multi-sided printing setting
¡
During memorization:
IMPORTANT :
2. Operation procedure
Accessing HELP modes
a
See page 219
q
Access HELP mode
H-62
, and press the
PRINT
key.
HELP-062
Adjustment/Specification setting
1111
1:
1111 2:
1111
4:
1111 5:
1111
3:
1111
6:
e
Use the [ 0 ] and [ 1 ] numeric keys to enter a 4-place binary
value for the desired correction amount.
See the table below for 4-place binary values and the corresponding
correction amounts.
a
To exit the HELP mode : Turn the power switch OFF.
a
To access another HELP mode :
Enter the desired mode number
using the numeric keys.
t
Press the
STOP
key.
The HELP mode selection display will reappear.
- SAVE -
w
Press the and/or key to select item.
0***
1***
*0**
*1**
**0*
**1*
***0
***1
0000
Item
Not used
Edit monitor (OP) setting
CF card (OP) setting
Setting
OFF
ON
OFF
ON
Initial value
OFF
ON
1 : A B C D
CF card (OP) setting
*
0***
1***
*0**
*1**
**0*
**1*
***0
***1
0000
Item
Clock PCB (OP) setting
Not used
Program processing PCB
for book shadow eraser and
multi-sided printing setting
**
Setting
Main PCB unit
P-memory PCB unit
Initial value
2 : A B C D
Not used
OFF
ON
*
Make sure to set the CF card T kit to 0 0 1 1.
(Compatible with the main PCB ROM Ver. 1.30 and the P-memory PCB ROM Ver. 1.18)
**
Make sure to set to "1" when mounting an option (the edit monitor or CF card kit) on the machine.
(Compatible with the main PCB ROM Ver. 1.29 and the P-memory PCB ROM Ver. 1.17)
When the version of mass-production machines is the same or higher, the default setting is "1".
(1) Edit monitor (OP) / CF card (OP) / Clock PCB (OP) / Program processing
PCB for book shadow eraser and multi-sided printing setting
A B C D