DUPLO SEIKO CORPORATION Duprinter DP-330, Service Manual

Page: 261 / 330

260
c
HELP Mode Function and Operation Procedures
chap.7
H-31
(1) Adjustment / specification setting HELP mode
ABCD
0000
0001
0010
0011
0100
0101
0110
0111
ABCD
1000
1001
1010
1011
1100
1101
1110
1111
Item
8 sheets
9 sheets
10 sheets
11 sheets
12 sheets
13 sheets
14 sheets
15 sheets
Item
0 sheet(initial value)
1 sheet
2 sheets
3 sheets
4 sheets
5 sheets
6 sheets
7 sheets
e
Press the [
=
] key.
The correction amount will be memorized in the battery PCB unit's
EEPROM. During memorization,
"SAVE"
will be displayed.
Do not turn off the power before the "SAVE" display has disappeared.
1. Functions
(1) Pre-print setting
¡
Use this to set a value for the number of pre-print sheets.
"Pre-print sheets" are extra sheets that are printed at the
start of printing, without being added to the print count.
(1) Pre-print setting
¡
During memorization:
IMPORTANT :
2. Operation procedure
Accessing HELP modes
a
See page 219
q
Access HELP mode H-31 , and press the PRINT key.
HELP-031
Adjustment/Specification setting
1111
w
Use the [ 0 ] and [ 1 ] numeric keys to enter a 4-place binary
value for the desired correction amount.
See the table below for 4-place binary values and the corresponding
correction amounts.
a
To exit the HELP mode : Turn the power switch OFF.
a
To access another HELP mode : Enter the desired mode number
using the numeric keys.
r
Press the STOP key.
The HELP mode selection display will reappear.
A B C D
- SAVE -