DUPLO SEIKO CORPORATION Duprinter DP-330, Service Manual

Page: 308 / 330

307
c
HELP Mode Function and Operation Procedures
chap.7
H-85
(1) Adjustment / specification setting HELP mode
ABCD Item Setting
0001
Set amount
Larger the paper feed timing
Smaller the paper feed timing
1110
1111
•
•
•
•
•
•
•
•
•
r
Press the [
=
] key.
The correction amount will be memorized in the battery PCB unit's
EEPROM. During memorization,
"SAVE"
will be displayed.
Do not turn off the power before the "SAVE" display has disappeared.
1. Functions
(1) Paper feed timing adjustment
¡
Following items are indicated.
1. 1st speed
2. 2nd speed
3. 3rd speed
4. 4th speed
5. 5th speed
(1) Paper feed timing adjustment
¡
During memorization:
IMPORTANT :
2. Operation procedure
Accessing HELP modes
a
See page 219
q
Access HELP mode
H-85
, and press the
PRINT
key.
HELP-85
Adjustment/Specification setting
1111
1:
1111
2:
1111
4:
1111
5:
1111 3:
e
Use the [ 0 ] and [ 1 ] numeric keys to enter a 4-place binary
value for the desired correction amount.
See the table below for 4-place binary values and the corresponding
correction amounts.
a
To exit the HELP mode : Turn the power switch OFF.
a
To access another HELP mode : Enter the desired mode number
using the numeric keys.
t
Press the STOP key.
The HELP mode selection display will reappear.
- SAVE -
Mode H-82, H-83 and H-84 are not used
A B C D
4th speed
2nd speed
1st speed
3rd speed
A B C D
5th speed
w
Press the and/or key to select item.