DUPLO SEIKO CORPORATION Duprinter DP-330, Service Manual

Page: 255 / 330

254
c
HELP Mode Function and Operation Procedures
chap.7
ABCD Item Setting
0000
Set amount
Standard (initial value)
Maximum
0001
0010
0011
•
•
•
•
•
1111
1 rank: 0.25%
e
Press the [
=
] key.
The correction amount will be memorized in the battery PCB unit's
EEPROM. During memorization,
"SAVE"
will be displayed.
Do not turn off the power before the "SAVE" display has disappeared.
1. Functions
(1) Scan R/E /secondary scanning setting (ADF)
¡
Adjust the scan R/E /secondary scanning of ADF with H-25 if
it cannot be corrected with H-24.
(1) Scan R/E /secondary scanning setting (ADF)
H-25
(1) Adjustment / specification setting HELP mode
¡
During memorization:
IMPORTANT :
2. Operation procedure
Accessing HELP modes
a
See page 219
q
Access HELP mode H-25 , and press the PRINT key. HELP-025
Adjustment/Specification setting
1111
w
Use the [ 0 ] and [ 1 ] numeric keys to enter a 4-place binary
value for the desired correction amount.
See the table below for 4-place binary values and the corresponding
correction amounts.
a
To exit the HELP mode : Turn the power switch OFF.
a
To access another HELP mode : Enter the desired mode number
using the numeric keys.
r
Press the STOP key.
The HELP mode selection display will reappear.
A B C D
- SAVE -