DUPLO SEIKO CORPORATION Duprinter DP-330, Service Manual

Page: 236 / 330

2
Display of presence/absence of the master on its travel path,
as a numerical value.
Adjust the sensitivity with VR on the sensor.
Master/Yes : about 10 - 30
Master/ No : about 140 or more
Master detection sensor adjustment
235
c
HELP Mode Function and Operation Procedures
chap.7
¡ Master detection sensor
VR1
440805
H-07
(2) Sensor/switch condition display HELP mode
e
Adjust the light-receipt level of the master detection sensor.
¡
During memorization:
- SAVE -
(2) Checking the condition of the master detection sensor
q
Access HELP mode H-07 , and press the PRINT key.
w
Check the displayed light-receipt level of the master detection
sensor.
r
Press the STOP key.
The HELP mode selection display will reappear.
Do not turn off the power before the "SAVE" display has disappeared.
IMPORTANT :
a
To exit the HELP mode :
Turn the power switch OFF.
a
To access another HELP mode : Enter the desired mode number
using the numeric keys.
HELP-007
Sensors
111
: Master sensor
Value