DUPLO SEIKO CORPORATION Duprinter DP-330, Service Manual

Page: 312 / 330

311
c
HELP Mode Function and Operation Procedures
chap.7
H-95
(1) Adjustment / specification setting HELP mode
r
Press the [
=
] key.
The correction amount will be memorized in the battery PCB unit's
EEPROM. During memorization, "SAVE" will be displayed.
Do not turn off the power before the "SAVE" display has disappeared.
1. Functions
(1) Setting when wrinkling occurs while printing the first sheet
¡
Following items are indicated.
1. Not used
2. Setting when wrinkling occurs while printing the first sheet
(1) Setting when wrinkling occurs while printing the first sheet
¡
During memorization:
IMPORTANT :
2. Operation procedure
Accessing HELP modes
a
See page 219
q
Access HELP mode H-95 , and press the PRINT key.
HELP-095
Adjustment/Specification setting
1111 1:
1111 2:
a
To exit the HELP mode : Turn the power switch OFF.
a
To access another HELP mode : Enter the desired mode number
using the numeric keys.
t
Press the STOP key.
The HELP mode selection display will reappear.
A B C D
- SAVE -
0***
1***
*0**
*1**
**0*
**1*
***0
***1
0000
Item
Wrinkling occurs while printing
the first sheet (when the print
speed is set to 3 or higher)
Not used
Setting
First sheet is printed at 5th speed
Initial value
0***
1***
*0**
*1**
**0*
**1*
***0
***1
0000
Item
Not used
Not used
Setting
Initial value
2 : A B C D 1 : A B C D
Not used
Not used
Not used
Not used
First sheet is printed at 3rd speed
e
Use the [ 0 ] and [ 1 ] numeric keys to enter a 4-place binary
value for the desired correction amount.
See the table below for 4-place binary values and the corresponding
correction amounts.
w
Press the and/or key to select item.
Mode H-89,90,91,92,93 and H-94 are not used