Add
to
Phonebook
Phonebook
93
●
If you enter Russian or Greek letters, certain symbols, pictographs, or full-pitch characters that are not in the Kuten Code List, for a
name, you cannot display them in the Reading Edit display.
●
If you enter “
ゎ
(reduced size)” or “
ヮ
(reduced size)” for a name, “
ワ
(half-pitch, regular size)” is displayed in the reading field.
●
The file size of a still image that you can store is VGA (640 x 480) or less and an image of up to 100 Kbytes in JPEG format or GIF
format.
●
If you store a still image larger than 128 x 96 dots, it is displayed reduced on the detailed Phonebook display.
●
If you store a still image larger than 176 x 144 dots, it is displayed reduced on the Call Receiving display.
●
If you store a Chara-den image larger than 128 x 96 dots, it is displayed reduced on the detailed Phonebook display.
●
If 700 phone numbers are already stored, “
<Not stored>” is not displayed.
●
If 700 mail addresses are already stored, “
<Not stored>” is not displayed.
Information
■
When you cannot add Phonebook entry
●
If the location (Memory No.) you have selected already contains an entry, the confirmation display appears asking whether to
overwrite it. Select “YES”
→
to replace the existing entry with the new one. Select “NO”
→
to keep the original entry in
that location (Memory No.) and return to the Add/Edit display. Enter another memory number.
●
In ordinary mode other than “Secret mode” or “Secret only mode”, you cannot overwrite the entry stored in “Secret mode” or
“Secret only mode”. Enter another memory number.
●
You cannot store Phonebook entries while “Keypad dial lock”, “Restrict dialing” or “PIM lock” is set.
■
When Phonebook editing is interrupted
When the battery goes flat
When the battery alarm sounds while you are editing a Phonebook entry, the message “Recharge battery” (see page 45) appears.
The data you are editing will be saved automatically, so you can charge the battery and continue editing, or you can change to a
charged battery and then resume editing as follows:
1. Stand-by display
Add to phonebook
Phone/UIM
●
If you select the storage location for the interrupted Phonebook entry, the confirmation display appears asking whether to
resume editing.
2. Re-edit.
●
To add a new Phonebook entry, select “New”
→
. In the case, the data you are editing is retained. If you try to store the
interrupted entry after you finish storing a new one, the confirmation display appears again.
3. Resume editing the interrupted entry.
●
Only the most recently interrupted entry is retained.
●
If you resume editing the data but then cancel editing without storing it, that data will be abandoned. Once you recall the data,
be sure to store it.
If you receive a call or mail
If you receive a call or mail while editing a Phonebook entry, you can respond it leaving the edited data as it is, thanks to
the Multitask function.
To return to the Phonebook Edit display, press and hold
for at least one second to switch the menu. You can return to the
Phonebook Edit display also by ending the call or mail function.
■
Important
■
●
The stored contents may be lost due to a malfunction, repair, or other mishandling of the FOMA phone. You are well advised to
take notes of the contents stored in the FOMA phone. If you have a personal computer, you can save them also to the personal
computer by using the FOMA USB Cable (option) and the Data Link Software (see page 448).
●
Note that the handling counters such as a DoCoMo shop might not be able to copy data from your existing FOMA phone to the new
one, depending on the specifications.
Be advised that we cannot be held responsible for the loss of data stored in your FOMA phone.
Summary of Contents for prosolid II foma P851i
Page 156: ...154...
Page 296: ...294...
Page 297: ...i channel What is i channel 296 Using i channel 298 Using Detailed Functions 298 295...
Page 430: ...428...
