Docomo prosolid II foma P851i, Manual

Page: 81 / 488

79
Record
Message
Making
Calls/Receiving
Calls
■
Icons while Record Message is activated
〜
: Indicates the number of recorded messages.
■
Incoming calls when Record Message is set to “ON”
After the ringing time elapses, the caller hears the answer message. For a video-phone call, the still image set for “Preparing” of
“Select image” is displayed on the other party’s display.
Then recording starts. For a video-phone call, the still image set for “Record message” of “Select image” is displayed on the other
party’s display.
When recording ends, the “Missed call” icon and “Record message” icon appear on the desktop. Select the “Recorded message” icon
and press ; then the display for “Play/Erase msg.” appears.
● Answer message priority: “Setting by phone number”
→
“Setting by group”
→
“Record message setting”
■
To answer a call while the answer message is played back or a message is recorded
Press or .
■
Conditions and results while Record Message is activated
■
Important
■
The saved contents may be lost owing to a malfunction, repair, or other mishandling of the FOMA phone. We cannot take any
responsibility for the loss of data, so you are advised to take a note of data stored in the FOMA phone and store them separately.
Condition
When “ ” is displayed
When Drive Mode and Record Message
are simultaneously activated
When there are already five record
messages
During a record message is being
recorded
When Record Message is set with Voice
Mail Service or Call Forwarding Service
When ring start time set for “Ringing
time” is longer than the ring time set for
Record Message
When Manner Mode is set to “Original”,
and “Record message” to “ON” there
When “Voice announce 1” or “Voice
announce 2” is set for an answer
message
Result
Does not work.
Drive Mode has priority and Record Message does not work.
The subsequent callers cannot leave messages and will not hear the answer message.
●
Delete the recorded messages so that new messages can be left.
⇒
See page 81
You cannot receive a call from a third party.
●
The third party will hear the busy tone.
The priority depends on the ringing time set for Voice Mail Service or Call Forwarding
Service.
●
To give Record Message priority, set its ringing time shorter than that for Voice Mail
Service or Call Forwarding Service. Even when you do this, Voice Mail Service or Call
Forwarding Service will work if there are already five record messages.
The call is switched to Record Message without ringing.
●
To enable ringing before switching to Record Message, set a longer ring time for
Record Message than “Ring start time”.
You can record messages during Manner Mode even when Record Message is not set to
“ON”.
If “Voice announce 1” or “Voice announce 2” is deleted, the answer message will be set
to “Japanese 1”.