Docomo prosolid II foma P851i, Manual

Page: 44 / 488

42
Attach/Remove
Batteries
Confirming
before
Use
■
Attaching
While pressing the “ ”
part, slide the rear cover
(2 mm or more) in the
direction of the arrow to
unlock.
1
Insert the battery pack in
the direction A with the
arrow mark facing
upwards and push it in the
direction B.
●
Securely fit the claws of the battery
pack into the grooves of the FOMA
phone.
2
Slide the rear cover in the
direction of the arrow and
attach it in place.
3
■
Removing
● Turn the power off before replacing the battery.
●
Make sure that the tray for the UIM is not drawn out when attaching the battery. If the tray is drawn out, the battery cannot be
attached. Note that the UIM or tray may be damaged if the battery is forcibly attached.
●
If you try to force the battery pack into place, you could damage the charging terminals of the FOMA phone.
●
For details about the battery, see the manual for Battery Pack P07.
Arrow
Take hold of the projection of the
battery pack to lift it up.
2
Projection
Attach/Remove Batteries
■
Use the FOMA phone’s dedicated Battery Pack P07.
■
About battery life
●
Batteries are consumables. The usable time of all chargeable batteries shortens slightly each time they are charged.
● When the usable time of the battery becomes about half the time it was at purchase, replacing is recommended because
the battery is nearing the end of its life. Depending on the conditions of use, the battery may swell slightly as it nears the
end of its life, but this is not a problem. (The life of the battery is about one year. However, it may shorten if you repeat
charging and discharging in a short period of time, charge in hot environments, or charge continuously over a long period
of time.)
For environmental protection, bring the exhausted battery to an NTT DoCoMo,
dealer, or recycle shop.
Li-ion
While pressing the “ ” part, slide the rear
cover (2 mm or more) in the direction of
the arrow to unlock.
1
About Battery Pack
Information