Docomo prosolid II foma P851i, Manual

Page: 389 / 488

387
Setting
Dial-up
Network
Data
Transmission
Specify an access point name (APN).
Enter an access point name (APN) in the following format:
AT+CGDCONT = cid, "PPP", "APN"
cid: Enter 2 or any number from 4 to 10.
※
If you have already specified cid, be careful that its
contents are overwritten by the access point name you
enter here.
"APN": Enclose an access point name (APN) in double
quotation marks (").
"PPP": Enter "PPP" as it is.
(Example: When specifying APN “XXX.abc” in cid2)
AT+CGDCONT=2,"PPP","XXX.abc"
Enter this character string, then press If “OK” appears,
the APN setting is completed.
●
To confirm the current APN setting, enter
“AT+CGDCONT?
”. The set APNs are listed on the
screen.
⇒
See this page
7
The properties of the COM port appear on the
display, then Click “OK”.
● This display appears when you select a COM port in
step 5.
6
Confirm that “OK” appears on the display. 8
“ ファイル (File)” menu Select “ ハイパーター
ミナルの終了 (Exit Hyper Terminal)” to exit
Hyper Terminal.
●
If a message “ 現在、接続されています。切断してもよ
ろしいですか
? (Currently connected. Do you want to
disconnect this line?”) appears, select “ はい (Yes)”.
●
A message “
セッション
XXX
を保存しますか ? (Do you
want to save session XXX?)” then appears. You do not
need to especially save that session.
9
●
Displays may differ depending on the personal computer you
use.
●
The access point name (APN) is information to be registered
in the FOMA phone, so if you connect another FOMA phone,
you need to register the access point name (APN) again.
●
To continue using the access point name (APN) of the
personal computer, register the same access point name
(APN) for the same cid number in the FOMA phone.
●
If the entered AT command is not displayed, enter “ATE1 ”.
Information
■ cid (Registration number)
The FOMA phone has registration numbers, cid1 through cid10.
cid1 contains “mopera.ne.jp” and cid3 contains “mopera.net” as an
access point name (APN). To connect to a provider other than
mopera U or mopera, you need to set the access point name
(APN) to one of cid2 or cid4 through cid10 as specified by the
provider or network administrator.
Default cid contents
■ “Phone number” for connecting to an access point name
(APN) you register in cid
“
＊
99
＊＊＊
<cid No.>
＃
”
(Example) When connecting to the access point name (APN) you
register in cid2, enter the following:
＊
99
＊＊＊
2
＃
■
About resetting and confirming the access point name
(APN) settings
You can use AT commands to reset and confirm the access point
name (APN) settings.
Resetting access point name (APN)
The access point name (APN) for cid=1 returns to “mopera.ne.jp”
(default), and for cid=3 returns to “mopera.net” (default); the
settings for cid=2 and cid=4 to cid10 are reset to being
unregistered if you reset them.
(Entry method)
AT+CGDCONT=
(When resetting all the cid contents)
AT+CGDCONT=<cid> (When resetting only a specific cid)
Confirming access point name (APN)
The currently specified access point name appears on the screen.
(Entry method)
AT+CGDCONT?
Registration No. (cid) Access point name (APN)
1 mopera.ne.jp (mopera)
2 Not defined
3 mopera.net (mopera U)
4 to 10 Not defined
■
Specifying “caller ID notified/not notified” in dial-up
network
Also by dial-up network setting (see page 491), you can add “186
(notified)” or “184 (not notified)” to each access point number.
When you specify “186 (notified)” or “184 (not notified)” using both
the
＊
DGPIR command and dial-up network setting, your caller ID
is set as follows:
● To connect to mopera U or mopera, you need to notify the access
point of your caller ID.
Caller ID notified / not notified
Notified
Not notified
Notified
Not notified
(“184” specified in the dial-up
network has a priority)
Notified
(“186” specified in the dial-up
network has a priority)
“Caller ID notified /
not notified” with
＊
DGPIR
command
Not set
Not notified
Notified
Not set
Not notified
Notified
Not set
Not notified
Notified
Dial-up network
setting (cid = 3)
＊
99
＊＊＊
3#
184
＊
99
＊＊＊
3#
186
＊
99
＊＊＊
3#