Docomo prosolid II foma P851i, Manual

Page: 382 / 488

380
Setting
Transmission
Data
Transmission
Select “64K データ通信 (64K data
transmission)”, then click “ 次へ (Next)”.
Confirm that “64K データ通信 (64K data transmission)” is
checked, then click “
次へ
(Next)”.
2
Select “mopera U への接続 (Connect to
mopera U)” or “mopera への接続 (Connect to
mopera)”, then click “ 次へ (Next)”.
When “mopera U への接続 (Connect to mopera U)” is selected,
the confirmation display appears asking whether you have
signed up for it. Click “
はい (YES)” if you have signed up for it.
●
If you use a provider other than mopera U or mopera
⇒
See this page
3
Enter an access point name, then click “
次へ
(Next)”.
You can specify any name for the currently created
connection. Enter a plain name in the “
接続名 (Access point
name)” field. Confirm that “FOMA P851i” is displayed in the
“
モデムの選択
(Select a modem)” field.
●
You cannot enter the following half-pitch symbols:
￥
, /, :,
＊
, ?, !, <, >, |, and ”.
4
Click “
次へ
(Next)”.
You can leave the “ ユーザ名 (user name)” and “ パスワード
(password)” fields blank.
● For Windows XP and Windows 2000 Professional,
perform the user selection randomly.
For Windows Me and Windows 98, the menu for
selecting available users does not appear.
5
Confirm the set information, then click “
完了
(Finish)”.
● To change the set contents, click “
戻る
(Back)”.
●
If “ デスクトップにダイアルアップのショートカットを作
成する
(Create a dial-up shortcut on the desktop)” is
checked, a dial-up shortcut will be created on the
desktop.
6
Click “OK”.
The setting has been completed.
Open the dial-up shortcut icon automatically
created on the desktop; the connection starts.
⇒
See page 381
7
To use a provider other than mopera, you may need to
separately apply a contract with the provider.
Perform steps 1 and 2 of “Using mopera U or
mopera as an access point” (see page 379). 1
Using a provider other than mopera U or
mopera as an access point
Select “ その他 (Others)”, then click “ 次へ (Next)”. 2
Enter dial-up information.
①
“
接続名
(Access point name)” (arbitrary)
② “ モデムの選択 (Select a modem)” (FOMA P851i)
③
“
電話番号
(Phone number of provider)”
Correctly enter these items according to the provider
information.
●
You cannot enter the following half-pitch symbols in the
“
接続名
(Access point name)” field:
￥
, /, :,
＊
, ?, !, <, >, |, and ”.
3
Specify “
ユーザー名
(User name)” and “
パスワ
ード
(Password)”, then click “
次へ
(Next)”.
To specify the user name and password, correctly enter the
information supplied from your service provider, taking care
of uppercase and lowercase letters and so on.
●
For Windows XP and Windows 2000 Professional,
perform the user selection randomly.
For Windows Me and Windows 98, the menu for
selecting available users does not appear.
6
For Windows
®
XP and Windows
®
2000 Professional
Click “
詳細情報の設定
(Set detailed
information)”.
The screen for specifying “IP
アドレス
(IP address)” and “
ネ
ームサーバー (name server)” appears. When entering dial-
up information for the provider you have subscribed or
Intranet LAN system, specify addresses according to the
entry instruction messages, then click “OK”.
4
Click “
次へ
(Next)”. 5