![Docomo prosolid II foma P851i Manual Download Page 45](http://html1.mh-extra.com/html/docomo/prosolid-ii-foma-p851i/prosolid-ii-foma-p851i_manual_2515063045.webp)
43
Charging
the
FOMA
Phone
Confirming
before
Use
The estimated charging time is for when the FOMA phone is
turned off and the battery is being charged from empty. The
charging time will be longer if you charge the battery with the
power turned on.
Charging the FOMA Phone
■
For details, refer to the manuals for the FOMA AC Adapter 01 (option),
FOMA AC Adapter 01 for global use and domestic use (option), and FOMA DC Adapter 01 (option).
■
For charging the battery via the AC or DC Adapter, the battery must be attached to the FOMA phone.
■
During charging, you can still answer calls if the FOMA phone is turned on. This will consume the
charged amount so that charging will take longer.
■
If you have a long time video-phone call during charging, the temperature inside the FOMA phone may rise
and charging may be suspended. In such a case, wait for a while and try charging again.
■
Remove and insert the connector slowly and securely, without using unnecessary force.
■
Do not charge for long periods of time (several days) with the FOMA phone turned on. Otherwise, when
charging finishes, the FOMA phone will receive power from the battery so that when you actually use the
FOMA phone, you will be able to do so for just a short amount of time before the battery alarm sounds. If
this happens, charge the battery correctly. When charging the battery again, first disconnect the FOMA
phone from the AC Adapter (or Desktop Holder) or DC Adapter and then set it again.
Charging
※
Continuous talk time is the estimated time that the FOMA phone can be used for calls when radio waves can be sent and received normally.
※
Continuous standby time is the estimated time when radio waves can be received normally. The standby time could be about half of this
estimate depending on the battery level, function settings, other ambient conditions such as temperature, and the status of radio waves
in the area (weak or no radio waves, for instance). When you use i-mode communications, the talk/transmission time and standby time
will be shorter. Further, even if you do not make calls or execute i-mode transmission, the talk/transmission time and standby time will
be shorter if you compose i-mode mail, start up a downloaded i-
α
ppli or the i-
α
ppli Stand-by display, execute data transmission or
Multiaccess.
※
The continuous standby time for standstill is the average number of hours you can use the FOMA phone in standstill status when it is
closed and can receive radio waves normally.
※
The continuous standby time for in motion is the average number of hours you can use the FOMA phone in the combined status of
“standstill” “moving” and “out of service area” when it is closed, in an area where it can receive radio waves normally.
Estimated time for charging battery
Estimated usable time for battery
AC Adapter
Approx. 130 minutes
DC Adapter
Approx. 130 minutes
The usable time for the battery varies
depending on the charging time and
the remaining life of the battery.
Continuous standby time
Standstill .........Approx. 460 hours
In motion .........Approx. 350 hours
Continuous talk time
Voice call ................Approx. 140 minutes
Video-phone call ....Approx. 100 minutes
(When a substitutive still image is used)
Summary of Contents for prosolid II foma P851i
Page 156: ...154...
Page 296: ...294...
Page 297: ...i channel What is i channel 296 Using i channel 298 Using Detailed Functions 298 295...
Page 430: ...428...