Docomo prosolid II foma P851i, Manual

Page: 153 / 488

151
Call
Setting
w/o
ID
Safety
Settings
Lock/Security Call setting w/o ID Enter your Terminal Security
Code
Not supported ··············Calls from the other party who cannot notify his/her caller ID, such as calls from overseas or from
ordinary phones via call forwarding services.
(Depending on the carriers the calls go through, however, his/her caller ID may be notified.)
Payphone·····················Calls from payphones, etc.
User unset ···················Calls from the other party who has set his/her caller ID not to be notified.
1
You can choose whether to receive (accept) or not to receive (reject)
the call depending on the reason for no caller ID. There are three
reasons; “Not supported”, “Payphone”, and “User unset”.
Setting Response to Incoming Calls without Caller ID
<Call Setting w/o ID> Menu 10
Setting at purchase
Not supported·······Accept : Same as ring tone
Payphone ··············Accept : Same as ring tone
User unset·············Accept : Same as ring tone
Accept or Reject
●
If you select “Accept”, go to step 3 on page 111 to select a ring tone or i-motion movie. If you select “Same as ring tone”, the
ring tone will be the one selected in “Phone” of “Select ring tone”. If you do not change the ring tone according to whether a
caller ID is notified or not, select “Same as ring tone”.
2
Incoming call Ringing time Ring start time
ON··············Specifies the time required to start ringing.
OFF············The ringing operation starts as soon as a call comes in. (The setting is completed).
1
Enter a start time (seconds).
●
Enter from “01” through “99” in two digits.
●
Not to change the specified start time, do not enter a start time; just press .
2
●
If you select “Reject”, the ring tone does not sound even if a call comes in, the call is stored in “Missed call” of “Received calls” and
the icon of “Missed call” appears on the Stand-by display. Also, the caller hears a busy tone even if you have set Voice Mail Service
or Call Forwarding Service to “Activate”. However, if you set the ringing time for Voice Mail Service or Call Forwarding Service to 0
seconds, or when the FOMA phone is out of the service area, or when the power is turned off, the busy tone will not be played,
activating Voice Mail Service or Call Forwarding Service. Note that in this case the record is not stored in “Received calls”, and the
“Missed call” icon does not appear on the Stand-by display.
● You can receive SMS messages or i-mode mail regardless of this setting.
Information
Delaying Start of Ringing
<Ringing Time>
Menu 90
Ring Start Time
You can specify the mute time before ringing
starts, for when a call comes in from the party whose phone number is not stored in the Phonebook. This
function is effective as a countermeasure for nuisance calls such as one ring phone scam (one-giri).
Setting at purchase
Ring start time ······OFF
Start time···············One second (when “Ring start time” is set to “ON”)