Docomo prosolid II foma P851i, Manual

Page: 372 / 488

See page 381 or 395
●
When setting up manually
⇒ See pages 384 and 396
Connect
Carry out data transfer (OBEX)
●
For USB connection
To transfer data by using
FOMA USB Cable, install
the data link software.
⇒
See page 448
●
For infrared rays
⇒
See page 328
Set up the access point
●
When using the FOMA PC
setup software
⇒
See page 375
Connector terminal
External
connector
(Face up
“DoCoMo” logo of
the connector for
insertion)
370
Preparation
Flow
for
Data
Transmission
Data
Transmission
Preparation Flow for Data Transmission
Connecting the FOMA Phone to a PC
Packet transmission
64K data transmission
■ About the attached “FOMA P851i CD-ROM”
When the FOMA PC setup software from the attached CD-ROM is
installed on your computer, you can use your computer to easily
make the various settings required for connecting the FOMA
phone and computer and performing data transmission.
The following outline shows a preparation flow for
packet transmission, 64K data transmission, and data
transfer (OBEX).
Data transfer (OBEX)
USB connection Infrared rays
Install the P851i transmission setup files
Windows ® XP ···········································p.371
Windows ® 2000 Professional··················p.372
Windows
®
Me ···········································p.372
Windows ® 98 ············································p.373
Connect the USB connector of the FOMA
USB Cable to the USB terminal of the
personal computer.
2
The following operation explains how to connect the
FOMA USB Cable (option).
Check the direction of the connector terminal
of the FOMA phone, then straight insert the
external connector of the FOMA USB Cable
until it clicks.
1
●
Do not forcibly insert/pull out the connector of the FOMA USB
Cable. Insert the connector of each connector in the correct
direction at the correct angle; otherwise, you will fail connection.
When the direction and angle are correct, you can insert a
connector smoothly without the strong force. If you fail to insert
a connector, check its shape and direction once more without
inserting a connector forcibly.
●
Purchase a dedicated FOMA USB Cable. (The USB Cable for
personal computers cannot be used because the shape of the
connector differs.)
●
Symbol “ ” appears on the FOMA phone when the FOMA
phone recognizes the connection with the personal computer after
you install the transmission setup files for packet transmission or
64K data transmission. Before you install the transmission setup
files, the FOMA phone does not recognize the connection with the
personal computer, and symbol “ ” does not appear.
●
Do not connect/disconnect the FOMA USB Cable in succession.
Once you connect/disconnect the cable, wait for a while, and try
again.
●
Do not disconnect the FOMA USB Cable during data
transmission.
Personal
computer
USB terminal
FOMA phone
FOMA USB Cable
USB connector
■ Removing
1. While holding down the release buttons of the external
connector of the FOMA USB Cable, straight pull out the
connector.
2. Pull out the FOMA USB Cable from the USB terminal of the
personal computer.
Release button
Release button
Information