Docomo prosolid II foma P851i, Manual

Page: 341 / 488

339
Alarm
Other
Useful
Functions
■ When you set an alarm for “Alarm”,
“Schedule”, and “ToDo”
The icons appear on the desktop.
“ ” ············Displayed when an alarm is set for today
(except the setting for past time).
“ ” ············Displayed when an alarm is set for tomorrow
onward only.
●
If you set “Display” of “Main window clock” to “OFF”, or set
the stored schedule event/ToDo item to “OFF”, the icons
are not displayed.
■ When the time specified for “Alarm”,
“Schedule” or “ToDo” comes
The alarm sounds for about five minutes (in the case of
“Alarm”, the alarm sounds for specified time), and the vibrator
works as you set for “Phone” of “Vibrator”. If you set “Snooze
setting” of “Alarm” to “ON”, the alarm sounds for about one
minute at an interval of five minutes, up to six times, until
Snooze is released by pressing . During a call, the
alarm sounds from the earpiece three times repeatedly. The
set alarm message and an animation or i-motion movie linking
to the selected icon appear on the display.
Checking Alarm
1
Alarm
Select an alarm
●
You can bring up the edit display by pressing
( ).
⇒
Go to step 3 on page 338
Function Menu while Alarm is Displayed
1
While an alarm is displayed
( ) Select and operate
each below. menu function
⇒
Go to step 3 on page 338
The contents of alarm setting are displayed.
YES
●
To cancel: “NO”
YES
● To cancel: “NO”
Release all
Release this
Display detail
Edit
●
During operations
By “Alarm setting”, you can set the way of notifying during
operations.
⇒
See page 349
“Operation preferred”·····Does not notify during operations.
“Alarm preferred” ···········Always notifies.
● When the power is turned off
<Alarm>
When “Auto power ON” is set to “ON”, the power
automatically turns on to make an alarm notification
sound. When the auto-power setting is set to “OFF”, an
alarm does not sound with the power turned off. Even after
you turn the power on, the “Missed alarm” icon is not
displayed.
<Schedule/ToDo>
Even when the specified time comes, the alarm does not
sound. The “Missed alarm” icon is not displayed even after
turning the power “ON”.
●
In Manner Mode
<Alarm>
When the specified time comes, the vibrator works.
However, the alarm sounds if you have set the operations
for Manner Mode to “Original” and set “Alarm vol.” to other
than “Silent” in that setting.
<Schedule/ToDo>
When the specified time comes, the vibrator works and a
message is displayed. However, the alarm sounds if you
have set the operations for Manner Mode to “Original” and
set “Phone vol.” to other than “Silent” in that setting.
●
During All Lock and PIM lock
Regardless of the setting for “Alarm setting”, the alarm
does not sound even when the specified time comes. After
releasing All Lock or PIM Lock, the “Missed alarm” icon is
displayed on the desktop in the same way as when an
alarm did not sound.
⇒
See page 340
<Alarm only>
While the power is turned off during All Lock or PIM Lock,
the power does not turn on and the “Missed alarm” icon is
not displayed even after releasing All Lock or PIM Lock.
● While updating software program
The alarm tone does not sound even when the specified
time comes, regardless of the setting for “Alarm setting”.
When the specified time comes during updating software
program, the “Missed alarm” icon is not displayed even
after updating is completed.
●
During infrared exchange
The alarm tone does not sound even when the specified
time comes, regardless of the setting for “Alarm setting”.
The “Missed alarm” icon is displayed after infrared
exchange.
Next Page