Docomo prosolid II foma P851i, Manual

Page: 50 / 488

48
Set
Time
Confirming
before
Use
Enter year, month, date and time
Use to move the cursor and the numeric keys to enter numbers.
●
Enter the A.D. year.
●
Enter the time in the 24-hour format.
● To enter one-digit numeral for the date and time, enter two digits beginning with “0” as in “01” to
“09”.
●
If you enter a wrong number (such as “13” for the month), the entry is invalid.
●
The date/time you can set with this function is from 00:00 on January 1, 2005 through 23:59 on
December 31, 2037.
●
The set date and time will appear on the Stand-by and other displays.
■
About time correction function
The time displayed on the FOMA phone is corrected when the power is turned on, according to the clock information obtained from the
DoCoMo network. When the date/time has not been set, the time is set by receiving the clock information. When the date/time has been
set, the time is corrected if “Set time” is set to “Automatic”. Then, the time is corrected at 3 a.m. (during standby). If you want to set the time
with a lag, set the time manually. When you re-set to “Automatic”, turn the power off and on and then set to “Automatic”.
●
You cannot correct the time while another function is working, at power on after software update, when the UIM is not inserted, or while an
animation or Flash movie set for the Stand-by display is played back. In addition, you might not be able to correct the time depending on the radio
wave conditions, the timing the FOMA phone is turned on, or the i-
α
ppli software set for the i-
α
ppli Stand-by display.
● If the FOMA phone has not obtained any clock information, the time is not corrected by setting “Set time” to “Automatic” or even when 3
a.m. arrives.
●
Some few second errors might occur.
2
Clock Set time
・
Automatic ···············Corrects the date/time automatically. The setting is completed.
If the time cannot be automatically corrected such as when the date/time has not been set and “ ” is
displayed, the display for manually correcting the time appears. Follow step 2 to set the date/time. However,
the display for manually correcting the time does not appear when you set the date/time by Initial Setting.
・
Manual ·················Sets the date/time manually.
●
When “Notice call cost” is set to “ON”, the Terminal Security Code Entry display appears. Enter your Terminal Security Code
and press .
1
●
You can set the clock also during a call.
● You cannot use the following functions unless the clock is set:
Current time display during calls, Calendar, Alarm, Schedule, ToDo, Software update, i-
α
ppli auto start, the pattern data update of
the Scanning function, and Auto Reset Setting of Notice Call Cost.
●
The date/time you have set is retained even when the battery pack is replaced, however, it might be reset if the FOMA phone is left
for more than two weeks with the battery pack removed or empty. In that case, charge the battery and then set the date/time again.
You can select whether to correct the time automatically or set it manually.
To set the date/time manually, set “Set time” to “Manual”.
Setting Date and Time
<Set Time> Menu 31
Information