Docomo prosolid II foma P851i, Manual

Page: 333 / 488

331
Sending/Receiving
All
Data
Files
Data
Display/Edit/Management
You can send/receive the following data files all at
once to and from the FOMA phone via infrared
exchange; Phonebook entries, schedule events,
ToDo items, free memos, bookmarks, and mail
messages.
Sending/Receiving All Data Files
■ If you send/receive all data files
●
If you send all Phonebook entries, the “Own number” data
is sent as well.
●
All the data of “Own number” at the receiving end is
overwritten except the own number. The mail address is
overwritten by the sender’s address as well, so restore it at
the receiving end.
●
You can send or receive the protected incoming and
outgoing messages.
■ Be sure to read the following before
sending/receiving all data files:
●
Receiving all data files deletes all data you have stored
including the protected ones, and the received data
overwrites the existing data. Confirm that no important data
is stored before receiving all data files.
●
Receiving all data files in the Phonebook overwrites
personal data (except own number) stored in “Own
number”.
●
The Phonebook entries stored as secret data are also sent.
The sent “Secret data” is stored as “Secret data” at the
receiving end, too.
●
You cannot send/receive all Phonebook entries if “PIM
lock” or “Keypad dial lock” is set.
●
The group names in the Phonebook you have received are
stored, so the data set in “Group setting” is also
overwritten.
●
When you send/receive all data files, the bar indicating the
transmission status appears to notify you of the number of
sent data files (estimate). The bar may progress slowly or
look different from that viewed from the receiving end even
when the data has correctly been sent/received depending
on the size of the sending/receiving data.
Sending All Data Files
To send all data files, enter a session number (any
four-digit number). The receiving end needs to
enter the same session number.
●
Set up the receiving end to be able to receive data, and
then start sending within 30 seconds following the steps
below.
1
Display of the data to be sent
( ) Send all Ir data
Enter your Terminal Security
Code
2
Enter a session number.
●
Enter any four-digit number as a session number.
3
YES
●
To cancel: “NO”
●
To cancel the transmission: ( ) or .
●
You cannot send Phonebook entries and SMS messages in
the UIM.
●
Note that the schedule events at the receiving end are all
deleted if you send all ToDo items to the phone that does not
support ToDo.
●
If you send all messages, the mail containing the information
of the JPEG image in excess of 10,000 bytes, or the mail
containing link information for launching i-
α
ppli is transmitted
with the information deleted.
●
When sending all mail messages, the file attached to them
are sent as well, however, some files attached to the mail
may not be sent depending on the file format.
●
If transmission is interrupted and the confirmation display
appears asking whether to continue the transmission, select
“YES” → ; then you can resume the transmission.
●
The secret data files are sent as well.
●
When sending all Phonebook entries, you cannot send the
voice dial entries.
Information