Docomo prosolid II foma P851i, Manual

Page: 31 / 488

)
Shows the level of the received radio
waves.
(Strong) (Weak)
“
” is displayed when out of the
FOMA service area or where radio
waves do not reach.
Displayed during Self Mode.
⇒
See page 144
*
Blinks while i-mode is activated. “ ”
is displayed during data transmission
while connecting to i-mode.
⇒ See
pages 163 and 164
Displayed during packet
transmission. The icons vary
according to the transmission status.
⇒
See page 381
+
Displayed during SSL transmission.
⇒
See page 164
,
Might be displayed while the FOMA USB
Cable (option) is connected in the
Communication Mode.
⇒ See page 370
Might be displayed when connected to a
hands-free device.
Displayed when a call or
communication is started via a
hands-free device.
-
Displayed during infrared exchange.
⇒
See page 328
Displayed while the infrared remote-
controller is working.
⇒ See page 290
.
Displayed during a voice call.
Displayed during a video-phone call
(64K).
Displayed during a video-phone call
(32K).
Displayed during 64K data
transmission.
29
Display
Confirming
before
Use
/
Displayed during Multitask.
While multiple functions are activated,
“
” is displayed.
⇒
See page 336
0
Displayed while Vibrator is set to
“ON”.
⇒
See page 112
1
Displayed while Ring Volume is set to
“Silent”.
⇒
See page 73
“ ” is displayed even if you set
“Mail/Msg. ring time” to “OFF”.
⇒
See page 116
2
Displayed during Manner Mode.
⇒
See page 117
3
Displayed during Drive Mode.
⇒ See page 75
4
Displayed when the call charge has
exceeded the specified limit.
⇒
See page 354
5 Displayed while an alarm for “Alarm”,
“Schedule”, or “ToDo” is set.
If an alarm is set for that day, “
” is
displayed.
⇒
See page 339
6
〜
Shows the number of record
messages (0-5).
⇒
See page 78
7 〜
Shows the number of voice mail
messages (1–9) held at the Voice Mail
Center. If 10 or more messages are
held, “
” is displayed.
⇒
See page 362
8
Displayed while Display Light is set to
“OFF”.
⇒
See page 126
9
Displayed while Side Keys Guard is
set to “ON”.
⇒
See page 146
■
About the contents displayed:
●
Some characters and symbols on the display and Private window might be modified or abbreviated.
● The explanations in this manual are mainly based on the settings at purchase so the display on your FOMA phone may
not match the explanations if you changed the settings after purchase.
●
The color liquid crystal display uses high-precision production technology. The slightest change in the environment may
result in unlit or permanently lit pixels, but this is due to the structure of the color liquid crystal display and not a
manufacturing defect.
● The color display is shown as black and white in this manual, so the actual display looks slightly different.
●
If the FOMA phone has not been operated for a certain time with the power turned on, the display is dimmed and several
minutes after this ※ , the display goes off. The Command Navigation key flickers at about 5-second intervals. When an
operation is performed, the display appears again.
●
When you close the FOMA phone, the information on the Private window goes off after about 15 seconds. When you
operate a side key, the display brings up again.
※
Depends on the light time setting for Power Saver Mode.