Docomo prosolid II foma P851i, Manual

Page: 404 / 488

AT
Command
List
Data
Transmission
402
AT command Outline Parameter/Explanation Command execution example
ATS5=n
[M]
[&F]
ATS7=n
[M]
[&F][&W]
ATS30=n
[M][&F]
ATS103=n
[M][&F]
ATS104=n
[M][&F]
ATVn
[M]
[&F][&W]
ATXn
[M]
[&F][&W]
ATZ
[M]
AT
¥
S
[M]
AT
¥
Vn
[M]
[&F][&W]
Sets the back space (BS)
character.
Sets standby duration until
connection is complete.
Disconnects the line if an
outgoing call is not connected
within the specified time.
Sets the inactive timer (minute).
When no user data is sent or
received, the connection is cut
in more than set time. This
command is for only 64K data
transmission. When 0 is set, the
inactive timer turns to OFF.
Selects characters to pause for
incoming subaddress.
Selects characters to pause for
outgoing subaddress.
Sets all the result codes in the
numeric or alphabetical
notation.
Sets whether the speed is to be
indicated in CONNECT at
connection.
Detects busy tone and dial tone.
Resets the setting to the
contents of the nonvolatile
memory. If this command is
entered during transmission, the
line is disconnected.
Displays the contents of the
each command and S register
currently set.
Selects the response code
specifications at connection.
n=8: Setting at purchase (n=8 only specifiable.)
ATS5?: Inquires the set value.
n=1 to 120 (Setting at purchase=60) (unit: second)
121 to 255 are assumed to be 120 if specified.
ATS7?: Inquires the set value.
n=0 to 255 (Setting at purchase=0) (unit: minute)
n=0:
＊
(asterisk)
n=1: / (Slash) (Setting at purchase)
n=2:
¥
or back slash
n=0: # (sharp)
n=1: % (percentage) (Setting at purchase)
n=2: & (and)
n=0: Returns the result code with a numeric value.
n=1: Returns the result code in alphabetical
characters. (Setting at purchase)
n=0: Dial tone not detected; busy tone not detected;
speed not displayed.
n=1: Dial tone not detected; busy tone not detected;
speed displayed.
n=2: Dial tone detected; busy tone not detected; speed
displayed.
n=3: Dial tone not detected; busy tone detected; speed
displayed.
n=4: Dial tone detected; busy tone detected; speed
displayed. (Setting at purchase)
−
−
n=0: Does not use the extended result code. (Setting
at purchase)
n=1: Uses the extended result code.
ATS5=8
OK
ATS5?
008
OK
ATS7=60
OK
ATS7?
060
OK
ATS30=0
OK
ATS103=0
OK
ATS104=0
OK
ATV1
OK
ATX1
OK
(In online)
ATZ
NO CARRIER
(In offline)
ATZ
OK
AT
¥ S
E1 Q0 V1 X4 &C1
&D2 &S0
¥
V0
S000=000
S002=043
S003=013
S004=010
S005=008
S006=005
S007=060
S008=003
S010=001
S030=000
S103=000
S104=000
OK
AT
¥
V0
OK
※
The following commands do not result in an error even if specified; however, they do not function as commands.
･
AT (AT only entered.)
･
ATT (Tone setting)
･
ATP (Pulse setting)
･
ATS6 (Setting the pause time taken for dialing)
･ ATS8 (Setting the pause time by comma dialing) ･ ATS10 (Setting the automatic disconnection delay time)