122
Display
Phonebook
Image
Tone/Display/Light
Setting
Display Display setting Power saver mode
・
ON ··········If no operation is done for a certain period of time on the Stand-by display, the display goes off and the Command
Navigation key,
,
,
, and
flicker at about five-second intervals when the FOMA phone is open.
・
OFF ········Does not switch to Power Saver Mode.
1
Incoming call Disp. phonebook image
・
ON
・
OFF
1
You can set an image for incoming calls from each phone number stored in the FOMA phone’s Phonebook.
Detailed Phonebook display
(
) Utilities Picture
Go to step 3 on page 121.
“Picture” is indicated by “
★
”.
●
How to search the Phonebook
⇒
See page 97
●
When multiple phone numbers are stored in the Phonebook entry, press
on the detailed display to display the phone
number to which the image is set.
●
To release the calling image for the phone number, perform the same operation.
1
Set Power Saver Mode
You can set Power Saver Mode to reduce the battery consumption by clearing the display.
Setting at purchase
ON
●
The setting here applies to “Power saver mode” of “Display light” as well. Also, use “Light time (minutes)” of “Display light” to specify
a standby time until Power Saver Mode is set to “ON”.
⇒
See page 125
●
The FOMA phone does not switch to Power Saver Mode during a call, during data transmission, during charging, or while i-
α
ppli
Stand-by display is set.
●
Power Saver Mode is released in the following cases:
• When any key is pressed
• When a call comes in
• When a mail message or Message (R/F) arrives
• When Alarm tone (for Alarm, Schedule, ToDo, or battery expiration) sounds
• When i-
α
ppli launches automatically
• When the FOMA phone is opened or closed
●
In bright places, flickering of the Command Navigation key,
, , ,
and
might be hard to see.
Information
Displaying an Image Stored in the Phonebook during Ringing
<Display Phonebook Image>
Setting at purchase
ON
If the caller ID notified by the caller matches the phone number stored in the Phonebook, the image
stored in the Phonebook is displayed.
●
The priority order of the display for call receiving is; “Setting by phone number”
→
“Setting by group”
→
“Disp. phonebook image”
→
“Display setting”.
Information
●
You cannot set the calling image for the Phonebook entries stored in “Secret mode”, “Secret only mode”, and in the UIM.
●
Note that the setting for “Picture” of “Utilities” is valid only when a caller ID is provided. It is advisable to activate “Caller ID request” in
advance.
●
Note that the setting is released if you change the specified phone number.
●
To change the set calling image, release the current setting and proceed.
●
Use “Utilities” to check which phone number in the Phonebook entry is set, or to release the setting.
Information
Set by Phone Number
Summary of Contents for prosolid II foma P851i
Page 156: ...154...
Page 296: ...294...
Page 297: ...i channel What is i channel 296 Using i channel 298 Using Detailed Functions 298 295...
Page 430: ...428...
