![Docomo prosolid II foma P851i Manual Download Page 46](http://html1.mh-extra.com/html/docomo/prosolid-ii-foma-p851i/prosolid-ii-foma-p851i_manual_2515063046.webp)
44
Charging
the
FOMA
Phone
Confirming
before
Use
■
Charge with the AC Adapter only
*
Check the facing direction (surface or
rear) of the AC adapter plug and then
insert or pull it horizontally into or
from the FOMA phone.
Connect the AC Adapter (option) to the Desktop
Holder (option).
1
Insert the AC Adapter’s plug into an AC
outlet.
2
Set the FOMA phone onto the Desktop Holder.
Push it until it clicks.
Check that the Call/Charging indicator lights in red.
When the Call/Charging indicator flickers, dismount the AC adapter and battery
pack from the FOMA phone and then re-mount them for charging. If the symptom
persists, troubles with the AC Adapter, Desktop Holder or battery pack may be
involved, so consult a handling counter such as a DoCoMo shop.
●
Attach the battery pack to the FOMA phone beforehand.
●
Be sure to set the FOMA phone firmly onto the Desktop Holder. Also, be
careful that the connector cap or a commercial strap is not caught between the
FOMA phone and Desktop Holder.
●
Charging can be done even while the FOMA phone is open.
3
When charging completes, take the FOMA phone off
the Desktop Holder.
●
Unplug the AC Adapter from the AC outlet when not in use it for a long time.
4
Desktop Holder P11
①
②
FOMA AC Adapter 01
100 VAC
Insert horizontally
with engraved
side facing down
■
Indicator and display during charging and when charging is
completed
※
When the FOMA phone is turned off, “
” does not appear.
If you start charging with the battery flat, the Call/Charging indicator might not light
immediately; however, charging itself has started.
Open the
connector cap
Release
buttons
Plug horizontally
with engraved
side facing up
●
If the power is turned on, you can take calls even during charging. (Charging will take longer in this case.)
●
If the power is turned on, the “Charge sound” beeps at the volume set for “Phone” of “Ring volume” when charging starts and ends.
⇒
See page 115
●
The FOMA AC Adapter 01 uses 100 VAC only.
●
You cannot charge the battery pack by itself. The battery pack must be attached to the FOMA phone for charging.
●
If the fuse blows off when charging with the DC adapter, be sure to use a 2A fuse. The 2A fuse is consumables, so purchase at auto
parts stores in your neighborhood.
■
DC Adapter (option)
With the DC Adapter, you can use a cigarette lighter socket (12 V/24 V) in a car to charge the
FOMA phone with the battery pack attached.
Read the manual for the FOMA DC Adapter 01 for details.
The Call/Charging
indicator (lights in red)
Method of Charging
Information
Call/Charging indicator
“
” display
Charging
Lights in red
Blinks
Charging completed
Off
Lights
Summary of Contents for prosolid II foma P851i
Page 156: ...154...
Page 296: ...294...
Page 297: ...i channel What is i channel 296 Using i channel 298 Using Detailed Functions 298 295...
Page 430: ...428...