Docomo prosolid II foma P851i, Manual

Page: 403 / 488

AT
Command
List
Data
Transmission
401
Next Page
AT command Outline Parameter/Explanation Command execution example
AT+GMM
[M]
AT+GMR
[M]
AT+IFC=n,m
[M]
[&F][&W]
AT+WS46=n
[M]
[&F][&W]
ATA
[M]
ATD
[M]
ATEn
[M]
[&F][&W]
ATHn
[M]
ATIn
[AT][M]
ATOn
[M]
ATQn
[M]
[&F][&W]
ATS0=n
[M]
[&F][&W]
ATS2=n
[M]
[&F]
ATS3=n
[M]
[&F]
ATS4=n
[M]
[&F]
Displays the product name
(FOMA P851i) of the FOMA
phone.
Displays the version of the
FOMA phone.
Selects the flow control method.
Selects the wireless
transmission network of the
FOMA phone.
Processes an incoming call in the
mode in which the FOMA phone
received the incoming call.
Executes the automatic
outgoing processing for the
FOMA phone according to the
contents specified in the
parameter and dial parameter.
Sets whether echo-back is
issued to the DTE in the
command mode.
Places the FOMA phone into
the on-hook state.
Displays the ID code.
Returns from the online
command mode to the online
data mode during transmission.
Sets whether the result code is
to be displayed for the DTE.
Sets the number of rings
required until the FOMA phone
automatically receives an
incoming call.
Sets the escape character.
Sets the carriage return (CR)
character.
Sets the line feed (LF)
character.
ー
ー
n : DCE by DTE
m : DTE by DCE
0: No flow control
1: XON/XOFF flow control
2: RS/CS (RTS/CTS) flow control
setting at purchase: n, m = 2.2
AT+IFC?: Inquires the set value.
n=22: W-CDMA (Wideband CDMA) only specifiable.
(Setting at purchase)
ー
<cid>: 1 to 10
Displays the APN defined by +CGDCONT.
When calling cid1, you can omit the phone number like
“ATD
＊ 99 ＊＊＊ #.”
n=0: Issues no echo-back.
n=1: Issues echo-back. (Setting at purchase)
n=0: Disconnects the line. (Can be omitted)
n=0: Displays “NTT DoCoMo”.
n=1: Displays the product name. (Same as +GMM)
n=2: Displays the version of the PPP packet function.
(Same as +GMR)
n=0: Returns from the online command mode to the
online data mode. (Can be omitted.)
n=0: Displays the result code. (Setting at purchase)
n=1: Does not display the result code.
n=0: Does not automatically receive an incoming call.
(Setting at purchase)
n=1 to 255: Automatically receives an incoming call
with the specified number of rings.
(When n
≧
10, does not automatically receive a packet
(PPP) incoming call, then the line is disconnected
within about 30 seconds.)
ATS0?: Inquires the set value.
n=43: Setting at purchase
n=127: Makes escape processing invalid.
ATS2?: Inquires the set value.
n=13: Setting at purchase (n=13 only specifiable.)
ATS3?: Inquires the set value.
n=10: Setting at purchase (n=10 only specifiable.)
ATS4?: Inquires the set value.
AT+GMM
FOMA P851i
OK
AT+GMR
Ver1.00
OK
AT+IFC=2,2
OK
AT+WS46=22
OK
RING
ATA
CONNECT
ATD
＊
99
＊＊＊
1#
CONNECT
ATE1
OK
(During packet transmission)
+++
ATH
NO CARRIER
ATI0
NTT DoCoMo
OK
ATI1
FOMA P851i
OK
ATO
CONNECT
ATQ0
OK
ATQ1
(“OK” is not returned at this
time.)
ATS0=0
OK
ATS0?
000
OK
ATS2=43
OK
ATS2?
043
OK
ATS3=13
OK
ATS3?
013
OK
ATS4=10
OK
ATS4?
010
OK