Docomo prosolid II foma P851i, Manual

Page: 60 / 488

58
Switching
between
a
Voice
Call
and
a
Video-phone
Call
Making
Calls/Receiving
Calls
●
You can switch between a voice call and a video-phone call repeatedly.
●
When i-mode or packet transmission is in progress, the transmission is disconnected and the voice call is switched to the video-phone call.
With packet transmission, a confirmation display appears asking whether to disconnect the transmission.
Select “YES”
→
to disconnect it and to switch to the video-phone call. To cancel, select “NO”
→
.
●
When packet transmission is in progress at the other end, the message to the effect that the transmission cannot be switched is dis-
played and the voice call continues without switching to the video-phone call.
●
You cannot switch from a voice call to a video-phone call while “Multi calling” is displayed during a call if you have signed up for Call Waiting
Service.
● It takes about five seconds to switch. Switching may take a longer time depending on the radio wave conditions.
●
Depending on how the caller’s phone is working or on the radio wave conditions, switching from a voice call to video-phone call may
fail and the connection may be cut off.
●
If you switch between the voice call and video-phone call during a call, the call duration and call charge are counted respectively for
the calls. You are not charged while “Changing” is displayed.
● You cannot switch between the video-phone call and voice call unless “Indicate V-phone” is set to “Activate” at the other end.
See page 68 for “Indicate V-phone”.
●
Hands-free is not released even if you switch from the voice call to video-phone call during Hands-free.
You cannot set Hands-free ON/OFF while the display for “Changing” is displayed.
●
An alarm for “Quality alarm” and “Reconnect control” does not sound during switching.
Information
●
When the phone number has “0” at the beginning, “0” is replaced by the international access code and the country code.
■ When the beginning of the phone number is other than “+”, “ 31#+”, or “#31#+”
The display for selecting a country name appears in step 2 of “Storing/Editing Country Code” on
page 57.
If you select a country name, the international access code and the country code are added.
Information
You (caller) can switch between a voice call and a video-phone call during a call (this function is avail-
able for the phones that can switch between a voice call and a video-phone call).
●
If the other party has a phone which is capable of switching over, ( ) is displayed at the lower left of the display.
●
While switching over, “Changing” is displayed, and the voice guidance to that effect is played back.
During a voice call
( )
・
Change ····················Switches from a voice call to video-phone call.
・
Cancel ·····················Cancels switching and returns to the voice call.
・ Select image ···········Selects the image to be sent to the other party. ⇒ Go to step 2 on page 87
1
Switching from a Voice Call to Video-phone Call
Switching between a Voice Call and a Video-phone Call
During a video-phone call
( )
CHG to phone call YES
●
To cancel: “NO” (returns to video-phone call)
1
Switching from a Video-phone Call to Voice Call