Docomo prosolid II foma P851i, Manual

Page: 132 / 488

130
Illumination
in
Talk
Tone/Display/Light
Setting
Set Pattern/Edit Color Name/Adjust Color Tone
Incoming call Illumination Select and operate each item below.
1
Item
Set pattern
You can set illumination and
illumination pattern for the
Command Navigation key.
Adjust color (Edit color
name)
Adjust color (Adjust color tone)
Operation
Select from the followings.
・ Standard
・ Melody linkage
Adjust color
Edit color name
Select a color
Enter a name
●
Number of characters: Up to 10
full-pitch/20 half-pitch
characters
Adjust color
Adjust color tone
Select a color
Use to adjust the color
2
1
2
1
Explanation
・ Standard: Flickers by “ON for about 0.5 seconds” and “OFF for
about 0.5 seconds” repeatedly.
・ Melody linkage: Flickers in accordance with a melody.
● Even if you select “Melody linkage”, the illumination flickers in
“Standard” when an illumination pattern that links to melody is not
stored in the ring tone.
●
If you have set an i-motion movie for the ring tone in “Select ring
tone”, the illumination flickers in “Standard”.
●
Setting at purchase: Standard
●
You cannot select “Gradation”.
●
Enter a color name.
● You cannot select “Gradation”.
● Use to select a color and to change the color tone.
●
While recording “Record message”, playing back an answer message or during answer-hold, the Call/Charging indicator flickers in
the same pattern as for during a call.
Setting Flickering of Call/Charging Indicator during a Call
<Illumination in Talk>
Setting at purchase
OFF
Talk Illumination in talk
・
OFF ··························Does not flicker.
・
Color 1 to 7 ·············Flickers in a single color.
・ Gradation 1 to 3······Flickers in gradation pattern.
●
While you are selecting a color, the Call/Charging indicator flickers in the selected color for confirmation.
1
Information