manualshive.com logo in svg

DH Instruments PG7000, Operation And Maintenance Manual

The DH Instruments PG7000 features industry-leading precision and accuracy for pressure calibration. Enhance your calibration process with this reliable instrument. Easily access comprehensive Installation Instructions and user manual, available for free download from manualshive.com. Optimize your calibration experience with detailed guidance for seamless installation and improved productivity.

Share
Download
background image

 

3. GENERAL OPERATION 

 

Page 73 

© 1998-2008 DH Instruments, a Fluke Company 

3.9.5.1

 

FIRST SYSTEM RUN SCREEN 

 OPERATION 

The first SYSTEM run screen provides real time display of piston rotation rate,  
decay in piston rotation rate, piston position and piston fall rate. 

To access the first SYSTEM run screen, press 

[SYSTEM] 

from any other 

run screen. 

The first SYSTEM run screen displays: 

1. 

<nnn rpm>

:  Numerical value of current 

piston rate of rotation.  The unit of measure is 
rotations per minute 

[rpm]

 and cannot be 

changed.  Flashes when Not Ready and 
piston is floating (see Section 3.4.2). 

 

Indicates 

< ---- >

 when information is 

unavailable or out of range. 

2. 

<±nn/min>:

  Numerical value of current decay 

in piston rotation rate (deceleration).  The unit 
of measure is rotations per minute [rpm/min] 
and cannot be changed.  

< ---- >

 when 

information is unavailable or out of range.  

         

                  

 

nnn rpm     ±nn/min 
±n.nn mm   ±n.nn/min 

         

                  

 

 

3. 

<

±

n.nn/min>:

  Sign and numerical value of current piston vertical rate of displacement.  A 

negative value indicates piston falling.  A positive value indicates piston rising.  The unit of measure 
is millimeters per minute [mm/min] and cannot be changed.  Indicates 

< ---- >

  when 

information is unavailable or out of range. 

4. 

<

±

n.nn mm>:

  Sign and numerical value of current position of the piston within the piston 

stroke (see Section 3.5).  The unit of measure is millimeters 

[mm]

 away from mid-stroke 

position and cannot be changed.  Indicates 

<HSTOP>

 when the piston is at the high stop (all 

the way up) and 

<LSTOP>

 when the piston is at the low stop 

(all the way down).  Flashes when Not Ready and piston is floating (see Section 3.4.1).  Indicates 

< ---- >

 when information is unavailable or out of range. 

Pressing 

[ESCAPE] 

in the first SYSTEM run screen returns operation to the MAIN 

run screen.  Pressing 

[SYSTEM]

 or 

[

±

]

 toggles between the first and second run 

screen.  All function keys are active from the first SYSTEM run screen and 
operation returns to that screen when leaving functions the were accessed from it. 

 

  The measurement systems for piston behavior indications rely on movement of 

the mass loading bell.  Piston behavior indications (piston position, piston rotation 
rate) are not valid when the mass bell is not loaded on the piston. 

 

  See Section 3.5 for information on the piston stroke and measurement zone. 

 

3.9.5.2

 

SECOND SYSTEM RUN SCREEN 

 OPERATION 

The second SYSTEM run screen displays the values of piston-cylinder 
temperature and temperature rate of change measured by PG7000. 
PG7601 also displays reference vacuum and vacuum rate of change.  If internal 
or external measurement is specified for the vacuum values in SETUP (see 
Section 3.10), the second SYSTEM run screen provides a real time display of the 
values measured. 

To access the second SYSTEM run screen, press 

[SYSTEM] 

or 

[

±

]

 from the first 

SYSTEM run screen.  To access the first SYSTEM run screen, press 

[SYSTEM]

 

from any run screen. 

Summary of Contents for PG7000

































































































































































































































Reviews:

No comments

Related manuals for PG7000

4B M100 Operation Manual preview
M100
Brand: 4B Pages: 12
Xenith X1 Player'S Manual preview
X1
Brand: Xenith Pages: 17
Baintech PowerTop User'S Operation Manual preview
PowerTop
Brand: Baintech Pages: 7
Baicheng Innovations PLUTO User Manual preview
PLUTO
Brand: Baicheng Innovations Pages: 32
FeiYu Tech vimble 2 Reviews And Tutorials preview
vimble 2
Brand: FeiYu Tech Pages: 6
Faudi SLUGGUARD Operating Instructions Manual preview
SLUGGUARD
Brand: Faudi Pages: 18
ABLE VEGAPULS 62 Installation & Maintenance Instructions Manual preview
VEGAPULS 62
Brand: ABLE Pages: 20
dol sensors DOL 25 NPN DOL Technical User Manual preview
DOL 25 NPN DOL
Brand: dol sensors Pages: 4
Speed Link PECOS Universal Quick Install Manual preview
PECOS Universal
Brand: Speed Link Pages: 4
W-Tec Ondrejnik User Manual preview
Ondrejnik
Brand: W-Tec Pages: 6
Vortice Kit Vario CO2 Instruction Booklet preview
Kit Vario CO2
Brand: Vortice Pages: 132
Waterscout SMEC 300 Soil Product Manual preview
SMEC 300 Soil
Brand: Waterscout Pages: 24
Toro 140-1914 Installation Instructions Manual preview
140-1914
Brand: Toro Pages: 8
ZEN AROME TULIPE Instruction Manual preview
TULIPE
Brand: ZEN AROME Pages: 29
A&D FXi-09 Instruction Manual preview
FXi-09
Brand: A&D Pages: 10
Actia SmarTach Manual preview
SmarTach
Brand: Actia Pages: 102
S+S Regeltechnik AERASGARD RFTF-C02 Operating Instructions, Mounting & Installation preview
AERASGARD RFTF-C02
Brand: S+S Regeltechnik Pages: 16
Armattan Mini FPV Assembly Manual preview
Mini FPV
Brand: Armattan Pages: 11

Brands by name

Popular brands

Load more brands