Delta DPH-300K, User Manual

Page: 201 / 240

7 - 2 9
7 LCD Display & Settings
(1) The status of the EMS 1000 (EnviroProbe) device (ID #) has been set as ' Enable '
(please refer to
(066HWWLQJ
), but the device (ID #) is not connected to the
UPS or the connection cable may be damaged.
(2) The ID # setting is wrong. Please refer to
(066HWWLQJ
.
At this time, the warning message ' The EMS 1000 ID # Communication Fail ' shown in
WKH¿JXUHEHORZZLOODSSHDU
4U
2
1
1
On-Line
UPS-1.1 SETUP MAINTENANCE LOG IN
Administrator
MEASUREMENT
Warning
WARNING
10:15
May 25,2018
2
WARNING
Log Solution
Touch Panel Comm Loss
PFC#1 Fan Fault
Please contact service personnel for more information.
Please contact service personnel for more information.
2. After connection of the EMS 1000 (EnviroProbe) to the UPS, if you don’t set the status
of the EMS 1000 (EnviroProbe) device (ID #) as ' Enable ' (please refer to
(06
6HWWLQJ
), the information of the EMS 1000 (EnviroProbe) device (ID #) will not show on
the EMS screen.
If none of the status of the EMS 1000 (EnviroProbe) devices (ID #) is set as ' Enable '
(please refer to
(066HWWLQJ
), the EMS screen will show as follows.
Standby
ID
UPS-1.1 SETUP MAINTENANCE LOG IN
Administrator
MEASUREMENT
EMS
EVENT LOG
10:15
May 25,2018
EMS
Normal Warning Alarm Off
Temperature Title Humidity DI1 DI2 DI4 DI3