Dell PowerVault TL2000, User Manual

Page: 253 / 283

Table C-2. LTO Tape Drive Sense Data (continued)
Byte
Bit Address or Name
7 6 5 4 3 2 1 0
12-13 Sense Key 6 (Unit Attention)
EE 12 - Encryption - Key Change Detected
EE 18 - Encryption - Changed (Read)
EE 19 - Encryption - Changed (Write)
EE 40 - Encryption - EKM Identifier Changed
EE 41 - Encryption - EKM Challenge Changed
EE 50 - Encryption - Initiator Identifier Changed
EE 51 - Encryption - Initiator Response Changed
2A 11 - Encryption - Data Encryption Parameters Changed by Another I_T Nexus
2A 12 - Encryption - Data Encryption Parameters Changed by Vendor Specific Event
Sense Key 7 (Data Protect)
EF 10 - Encryption - Key Required
EF 11 - Encryption - Key Generation
EF 13 - Encryption - Key Translate
EF 1A - Encryption - Key Optional
EF C0 - Encryption - No Operation
26 10 - Encryption - Data Decryption Key Fail Limit
2A 13 - Encryption - Data Encryption Key Instance Counter Has Changed
74 00 - Security Error
74 01 - Encryption - Unable to Decrypt Data
74 02 - Encryption - Unencrypted Data Encountered While Decrypting
74 03 - Encryption - Incorrect Data Encryption Key
74 04 - Encryption - Cryptographic Integrity Validation Failed
74 05 - Encryption - Error Decrypting Data
14 FRU code
15 SKSV C/D Reserved BPV
When set to
1, the bit
pointer is
valid.
Bit pointer
16 -17 SKSV = 0: First Error Fault Symptom Code (FSC).
SKSV = 1: Field Pointer
18-19 First Error Flag Data
20 Reserved (0)
21 CLN Reserved Reserved VolValid
22-28 Volume Label
29 Current Wrap
30-33 Relative LPOS
34 SCSI Address
35 Frame number Drive number
Appendix C. Sense Data
C-11