manualshive.com logo in svg

Dell PowerVault TL2000, User Manual

The Dell PowerVault TL2000 is a reliable and efficient tape library, designed to meet the storage needs of small to medium-sized businesses. With its intuitive interface and advanced features, setting up and operating this device is a breeze. Get started with ease by downloading the free Getting Started Manual from manualshive.com.

Share
Download
background image

Laser Safety and Compliance

Before using the library, review the following laser safety information.

Class I Laser Product

The library may contain a laser assembly that complies with the performance
standards set by the U.S. Food and Drug Administration for a Class I laser
product. Class I laser products do not emit hazardous laser radiation. The library
has the necessary protective housing and scanning safeguards to ensure that laser
radiation is inaccessible during operation or is within Class I limits. External safety
agencies have reviewed the library and have obtained approvals to the latest
standards as they apply.

Performing the Safety Inspection Procedure

Before you service the unit, perform the following safety inspection procedure:

1.

Stop all the activities between the host and the library's tape drives.

2.

Turn off the power to the library by pushing in on the

Power

button (1)

shown in Figure 1-1 on Page 1-1 for 4 seconds.

3.

If drives are SCSI attached, disconnect the SCSI cable and check the SCSI bus
terminator for damage.

4.

Unplug the library's power cord or cords from the electrical outlet and the
library power supply.

5.

Check the library's power cord for damage, such as a pinched, cut, or frayed
cord.

6.

If drives are SCSI attached, check the tape drive's SCSI bus (signal) cable for
damage.

7.

If drives are FC/SAS attached, check the tape drive's FC/SAS cable for
damage.

8.

Check the cover of the library for sharp edges, damage, or alterations that
expose its internal parts.

9.

Check the cover of the library for proper fit. It should be in place and secure.

10.

Check the product label at the rear of the library to make sure that it matches
the voltage at your outlet.

xiv

Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide

Summary of Contents for PowerVault TL2000




























































































































































































































































































Reviews:

No comments

Related manuals for PowerVault TL2000

D-Link DI-634M Quick Installation Manual preview
DI-634M
Brand: D-Link Pages: 12
3Com OfficeConnect 1600 Datasheet preview
OfficeConnect 1600
Brand: 3Com Pages: 8
3Com 3CRWEASY96A Quick Start Manual preview
3CRWEASY96A
Brand: 3Com Pages: 8
Udoo NEO Step-By-Step Manual preview
NEO
Brand: Udoo Pages: 7
TE Connectivity InterReach Fusion ADCP-77-044 Manual preview
InterReach Fusion ADCP-77-044
Brand: TE Connectivity Pages: 236
NETGEAR RP334 Specifications preview
RP334
Brand: NETGEAR Pages: 2
Multitech MultiConnect SE MTS2EA Quick Start Manual preview
MultiConnect SE MTS2EA
Brand: Multitech Pages: 8
IBASE Technology IB952 Series User Manual preview
IB952 Series
Brand: IBASE Technology Pages: 71
Net to Net Technologies UIM-1000T Installation Instructions preview
UIM-1000T
Brand: Net to Net Technologies Pages: 4
Thermalright AXP-100H MUSCLE Manual preview
AXP-100H MUSCLE
Brand: Thermalright Pages: 36
TDK InvenSense RoboKit1 Hardware Reference Manual preview
InvenSense RoboKit1
Brand: TDK Pages: 13
UHP UHP-1200 Installation Manual preview
UHP-1200
Brand: UHP Pages: 15
Ubiquiti LiteBeam M5-23 Quick Start Manual preview
LiteBeam M5-23
Brand: Ubiquiti Pages: 21
X-Micro IEEE 802.11b User Manual preview
IEEE 802.11b
Brand: X-Micro Pages: 49
Airlink101 AR325W Quick Installation Manual preview
AR325W
Brand: Airlink101 Pages: 13
EMTRUST CP75X User Manual preview
CP75X
Brand: EMTRUST Pages: 103
Network Critical SmartNA-X User Manual preview
SmartNA-X
Brand: Network Critical Pages: 200
Uniflair PCOWeb Instruction Manual preview
PCOWeb
Brand: Uniflair Pages: 24

Brands by name

Popular brands

Load more brands