manualshive.com logo in svg

Dell PowerVault TL2000, User Manual

The Dell PowerVault TL2000 is a reliable and efficient tape library, designed to meet the storage needs of small to medium-sized businesses. With its intuitive interface and advanced features, setting up and operating this device is a breeze. Get started with ease by downloading the free Getting Started Manual from manualshive.com.

Share
Download
background image

Choosing the Number of Logical Libraries for Your Library

Note:

Review the information in “Determining the Number of Logical Libraries”
on page 3-1 before completing the procedure in this section.

If you have a 2U or 4U library with only one drive, or do not wish to partition
your library, proceed to the next section, “Entering Path Failover Feature
Activation Key.”

One cartridge magazine cannot be assigned to two logical libraries. If you partition
a multi-drive library, each of the magazines must be assigned to a logical library
on a magazine boundary. The entire magazine must be part of one logical library
only.

Note:

If you have a 2U library with two drives, you have the capability to have
two logical libraries.

In a fully populated 4U library with four half height drives and four logical
libraries, resource assignments will be as follows:

v

Logical Library 1 will contain Drive 1 and the lower left cartridge magazine.

v

Logical Library 2 will contain Drive 2 and the upper left cartridge magazine.

v

Logical Library 3 will contain Drive 3 and the lower right cartridge magazine.

v

Logical Library 4 will contain Drive 4 and the upper right cartridge magazine.

The I/O Station and slots reserved for cleaning cartridges, if any, are shared among
all logical libraries.

1.

Click

Configure Library

→

Logical Libraries

in the left navigation pane.

2.

Select the number of logical libraries you would like to create in your library.

3.

Click

Submit

to create the logical libraries.

Entering Path Failover Feature Activation Key

For more information, refer to the

Dell PowerVault TL4000 Failover Configuration

Guide

, included with the library documentation.

1.

Click

Configure Library

→

Path Failover

in the left navigation pane.

2.

Enter the Control Path Failover 12-digit feature key in the spaces provided.

a77ug09

8

Figure 4-20. The 4U library Configure Library: Logical Libraries page

a77ug1

17

Figure 4-21. The Configure Library: Path Failover Feature Activation screen

Chapter 4. Installation and Configuration

4-21

Summary of Contents for PowerVault TL2000




























































































































































































































































































Reviews:

No comments

Related manuals for PowerVault TL2000

NEC Express5800/E120d-M Getting Started preview
Express5800/E120d-M
Brand: NEC Pages: 2
Xinje XG Series User Manual preview
XG Series
Brand: Xinje Pages: 76
Octavo OSD3358-SM-RED Getting Started Manual preview
OSD3358-SM-RED
Brand: Octavo Pages: 28
Obihai OBi110 Quick Start Manual preview
OBi110
Brand: Obihai Pages: 2
Paradyne Hotwire 5446 Notice preview
Hotwire 5446
Brand: Paradyne Pages: 2
Paradyne Hotwire 6381 Installation Instructions Manual preview
Hotwire 6381
Brand: Paradyne Pages: 20
Paradyne Hotwire 6381 Upgrade Instructions preview
Hotwire 6381
Brand: Paradyne Pages: 2
Zhone Hotwire 6381 Quick Installation Instructions preview
Hotwire 6381
Brand: Zhone Pages: 2
Draytek VigorIPPBX 2820 Series Quick Start Manual preview
VigorIPPBX 2820 Series
Brand: Draytek Pages: 29
Harmonic XOS User Manual preview
XOS
Brand: Harmonic Pages: 56
RadiSys EPC-31 Hardware Reference Manual preview
EPC-31
Brand: RadiSys Pages: 44
TP-Link TD-8817 User Manual preview
TD-8817
Brand: TP-Link Pages: 73
Dentsply Sirona inLab Speedcure 9494800 Instruction Manual preview
inLab Speedcure 9494800
Brand: Dentsply Sirona Pages: 91
Grizzly PSJ-M3 GEN2 User Manual preview
PSJ-M3 GEN2
Brand: Grizzly Pages: 9
Mitsubishi 32172 User Manual preview
32172
Brand: Mitsubishi Pages: 874
Mellanox Technologies ConnectX 3 Pro User Manual preview
ConnectX 3 Pro
Brand: Mellanox Technologies Pages: 57
ekwb EK-Loop Modulus Series User Manual preview
EK-Loop Modulus Series
Brand: ekwb Pages: 7
Freund FE-W826-T2 Setup Manual preview
FE-W826-T2
Brand: Freund Pages: 6

Brands by name

Popular brands

Load more brands