228
Glossary
system board
— As the main circuit board, the system board usually contains most of
your system’s integral components, such as the processor, RAM, controllers for
peripherals, and various ROM chips.
system configuration information
— Data stored in memory that tells a system what
hardware is installed and how the system should be configured for operation.
system diskette
— See
bootable diskette
.
system memory
— See
RAM
.
System Setup program
— A BIOS-based program that allows you to configure your
system’s hardware and customize the system’s operation by setting features such as
password protection. Because the System Setup program is stored in NVRAM, any
settings remain in effect until you change them again.
system.ini file
— A start-up file for the Windows operating system. When you start
Windows, it consults the
system.ini
file to determine a variety of options for the
Windows operating environment. Among other things, the
system.ini
file records
which video, mouse, and keyboard drivers are installed for Windows.
TCP/IP
— Transmission Control Protocol/Internet Protocol.
termination
— Some devices (such as the last device at each end of a SCSI cable)
must be terminated to prevent reflections and spurious signals in the cable. When
such devices are connected in a series, you may need to enable or disable the
termination on these devices by changing jumper or switch settings on the devices or
by changing settings in the configuration software for the devices.
TOE
— TCP/IP offload engine.
UNIX
— Universal Internet Exchange. UNIX, the precursor to Linux, is an operating
system written in the C programming language.
uplink port
— A port on a network hub or switch used to connect to other hubs or
switches without requiring a crossover cable.
UPS
— Uninterruptible power supply. A battery-powered unit that automatically
supplies power to your system in the event of an electrical failure.
USB
— Universal Serial Bus. A USB connector provides a single connection point for
multiple USB-compliant devices, such as mice and keyboards. USB devices can be
connected and disconnected while the system is running.
utility
— A program used to manage system resources—memory, disk drives, or
printers, for example.
UTP
— Unshielded twisted pair. A type of wiring used to connect systems in a
business or home to a telephone line.
V
— Volt(s).
Summary of Contents for PowerEdge M600
