manualshive.com logo in svg

Dell PowerEdge M600, Hardware Owner'S Manual

The Dell PowerEdge M600 is a versatile server designed for high-performance computing. Stay up-to-date with the latest features and configurations by accessing our free Information Update manual. Download it now from our website manualshive.com to maximize the potential of your PowerEdge M600 server.

Share
Download
background image

Installing Blade Components

115

Figure 3-10.

Memory Locations - PowerEdge M605

General Memory Module Installation Guidelines - PowerEdge M605

To ensure optimal performance of your system, observe the following 
guidelines when installing your system memory. 

•

Memory modules must be installed in pairs of identically-sized DIMMs, 
beginning with slots A1 and A2 (processor 1) and B1 and B2 (processor 2, if 
installed). These slots are marked by white ejector tabs.

•

All memory modules in the blade must be identical in speed and 
technology. The memory modules in each pair must be the same size.

•

In two-processor configurations, memory must be installed in the same 
configuration (symmetrically) for both processors.

•

If pairs of memory modules of different sizes are installed, the larger 
capacity memory modules must be installed in the lower numbered slots.

•

Memory sparing is supported if four (single-processor systems) or eight 
(dual-processor systems) memory modules are installed.

B1

B2

B3

B4

A4

A3

A1
A2

Summary of Contents for PowerEdge M600













































































































































































































































Reviews:

No comments

Related manuals for PowerEdge M600

ICP DAS USA I-7532M-FD User Manual preview
I-7532M-FD
Brand: ICP DAS USA Pages: 48
ICP DAS USA WF-2572 User Manual preview
WF-2572
Brand: ICP DAS USA Pages: 24
SAF Phoenix G2 IDU Quick Start Manual preview
Phoenix G2 IDU
Brand: SAF Pages: 30
Behringer EXPANSION CARD X-DANTE Quick Start Manual preview
EXPANSION CARD X-DANTE
Brand: Behringer Pages: 65
Delta Electronics DTE-20T Instruction Sheet preview
DTE-20T
Brand: Delta Electronics Pages: 1
LST ZEB2-1 Specifications preview
ZEB2-1
Brand: LST Pages: 1
LevelOne GSW-0890 Quick Installation Manual preview
GSW-0890
Brand: LevelOne Pages: 4
BOSER Technology HS-4703 Manual preview
HS-4703
Brand: BOSER Technology Pages: 78
NEC N8151-53 User Manual preview
N8151-53
Brand: NEC Pages: 114
Ametek Land System 4 Landmark Technic Processor User Manual preview
System 4 Landmark Technic Processor
Brand: Ametek Land Pages: 34
b&t RTL8720D Instruction Manual preview
RTL8720D
Brand: b&t Pages: 34
Motorola MC68VZ328 User Manual preview
MC68VZ328
Brand: Motorola Pages: 376
Motorola MC68341 User Manual preview
MC68341
Brand: Motorola Pages: 20
Advantage Boost Box Setup Manual preview
Boost Box
Brand: Advantage Pages: 4
Advantech AIMB-788 User Manual preview
AIMB-788
Brand: Advantech Pages: 114
Cambium Networks PMP 430 Series User Manual preview
PMP 430 Series
Brand: Cambium Networks Pages: 132
Extron electronics Scalable Multi-Graphic Videowall Processors MGP 464W Series Specifications preview
Scalable Multi-Graphic Videowall Processors MGP 464W Series
Brand: Extron electronics Pages: 2
MSI MS-6970A Manual preview
MS-6970A
Brand: MSI Pages: 57

Brands by name

Popular brands

Load more brands