manualshive.com logo in svg

Dell PowerEdge M600, Hardware Owner'S Manual

The Dell PowerEdge M600 is a versatile server designed for high-performance computing. Stay up-to-date with the latest features and configurations by accessing our free Information Update manual. Download it now from our website manualshive.com to maximize the potential of your PowerEdge M600 server.

Share
Download
background image

194

Troubleshooting Your System

•

(PowerEdge M805 systems only) – Missing or incorrectly installed HT 
cards in sockets CPU3 and CPU4.

Action

 

CAUTION: 

Many repairs may only be done by a certified service technician. You 

should only perform troubleshooting and simple repairs as authorized in your 
product documentation, or as directed by the online or telephone service and 
support team. Damage due to servicing that is not authorized by Dell is not covered 
by your warranty. Read and follow the safety instructions that came with the 
product. 

1

Remove the blade. See "Removing a Blade" on page 96.

2

Open the blade. See "Opening the Blade" on page 100.

 

CAUTION: 

The processor and heat sink can become extremely hot. Be sure the 

processor has had sufficient time to cool before handling. 

3

Ensure that the microprocessor(s) and heat sink(s) are properly installed. 
See "Processors" on page 128.

4

If your system only has one microprocessor installed

, ensure that it is 

installed in the primary processor socket. See Figure 7-3 or Figure 7-4.

5

For a PowerEdge M805 system

, check that hypertransport (HT) bridge 

cards are installed in sockets CPU3 and CPU4, and that both cards are 
fully seated in the processor sockets. See "HT Bridge Card (Service Only)" 
on page 138.

6

Close the blade. See "Closing the Blade" on page 104.

7

Install the blade. See "Installing a Blade" on page 98.

8

Run 

Quick Tests

 in the system diagnostics. See "Running System 

Diagnostics" on page 197.

If the tests fail or the problem persists, see "Getting Help" on page 217.

Troubleshooting the Blade Board

Problem

•

System message indicates a problem with the blade board.

Summary of Contents for PowerEdge M600













































































































































































































































Reviews:

No comments

Related manuals for PowerEdge M600

CAME QBEMFSB2 User Manual preview
QBEMFSB2
Brand: CAME Pages: 19
Hama 39707 Operating Instruction preview
39707
Brand: Hama Pages: 4
IEI Technology PCIE-Q470 Quick Installation Manual preview
PCIE-Q470
Brand: IEI Technology Pages: 19
IEI Technology KINO-DH420 User Manual preview
KINO-DH420
Brand: IEI Technology Pages: 87
IEI Technology HPE-4S2 Quick Installation Manual preview
HPE-4S2
Brand: IEI Technology Pages: 3
Lab.gruppen NLB 60E Operation Manual preview
NLB 60E
Brand: Lab.gruppen Pages: 35
TFortis Teleport-1 Configuration Manual preview
Teleport-1
Brand: TFortis Pages: 86
ADC HiGain HLU-231 List 8F Quick Installation preview
HiGain HLU-231 List 8F
Brand: ADC Pages: 7
Jaycar Electronics Duinotech Lilypad Plus XC3920 Quick Start preview
Duinotech Lilypad Plus XC3920
Brand: Jaycar Electronics Pages: 2
Quantum QWCM Installation Manual preview
QWCM
Brand: Quantum Pages: 7
ARTERY AT32F421 Series Reference Manual preview
AT32F421 Series
Brand: ARTERY Pages: 337
Technics SH-GE90 Service Manual preview
SH-GE90
Brand: Technics Pages: 20
Meinberg CPU-C15G2 Setup Manual preview
CPU-C15G2
Brand: Meinberg Pages: 14
Z-Wave IOMOD10F Hardware User Manual preview
IOMOD10F
Brand: Z-Wave Pages: 42
Cypress Semiconductor CY7C1410JV18 Specification Sheet preview
CY7C1410JV18
Brand: Cypress Semiconductor Pages: 26
ST X-NUCLEO-EEPRMA1 User Manual preview
X-NUCLEO-EEPRMA1
Brand: ST Pages: 22
Riverbed SteelCentral NetExpress 470 Upgrade And Maintenance Manual preview
SteelCentral NetExpress 470
Brand: Riverbed Pages: 140
Paradyne SMD2000-24E Installation Instructions Manual preview
SMD2000-24E
Brand: Paradyne Pages: 28

Brands by name

Popular brands

Load more brands