Dell POWERCONNECT 5524 User Manual Download

Page: 654 / 728

654

Dell PowerConnect 55xx Systems User Guide

Mapping DSCP Values to Queues Using CLI Commands

The following table summarizes the CLI commands for configuring fields in

the

DSCP to Queue

page.

The following is an example of the CLI command:

Bandwidth

The amount of traffic that can be received and transmitted on an interface

can be limited by the following:

•

Ingress Rate Limit

— Number of bits per second that can be received

from the ingress interface. Excess bandwidth above this limit is discarded.

•

Egress Shaping Rates

is defined by the following:

–

Committed Information Rate (CIR) sets the average maximum

amount of data allowed to be sent on the egress interface, measured in

bits per second

–

Committed Burst Shape (CBS) sets the maximum burst of data that

is allowed to be sent, even though it is above the CIR. This is defined

in number of bytes of data.

Table 22-5. DSCP to Queue CLI Commands

CLI Command

Description

qos map dscp-queue

dscp-list

queue-id

no qos map dscp-queue

[

dscp

list

]

Modifies the DSCP to queue

mapping.
Use the no form of this command to

restore the default configuration.

console(config)#

qos map dscp-queue

33 40 41

Summary of Contents for POWERCONNECT 5524

























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for POWERCONNECT 5524

Reviews:

Related manuals for POWERCONNECT 5524

Brands by name

Popular brands

Dell POWERCONNECT 5524, User Manual

Search results

Summary of Contents for POWERCONNECT 5524

Reviews:

Related manuals for POWERCONNECT 5524

Brands by name

Popular brands