44
Dell PowerConnect 55xx Systems User Guide
Stack Overview
The PowerConnect 5500 Stacking feature provides multiple switch
management through a single switch, so that all units in the stack are treated
as if they were a single switch. All stack members are accessed through the
management IP address, through which the stack is managed.
Each switch is a member in a stack, although the stack may consist of only a
single switch.
Up to eight units can be stacked.
This section covers the following topics:
• Stack Operation Modes
• Stacking Units
• Stack Topology
Stack Operation Modes
All stacks must have a Master unit, and may have a Master Backup unit. All
other units are connected to the stack as members (slaves).
A unit in the stack can be in one of the following modes:
•
Stack Master
— Runs the fully operational software of a switch. In
addition, it runs configures and manages all other units in the stack. All
protocols run in the context of the Master unit. It is responsible for
updating and synchronizing the Master Backup.
The Stack Master detects and reconfigures the ports with minimal
operational impact in the event of:
Unit failure
Inter-unit stacking link failure
Unit insertion
Unit removal
When the Master unit boots, or when inserting or removing a stack
member, the Master unit initiates a stacking discovering process.
Summary of Contents for POWERCONNECT 5524
Page 415: ...Dell PowerConnect 55xx Systems User Guide 415 ...
Page 728: ......
